tailplane's Usage Examples:

By July 1948 their proposal incorporated the stacked engine configuration and a high-mounted tailplane but was designed for Mach 1.

empennage consists of the entire tail assembly, including the tailfin, the tailplane and the part of the fuselage to which these are attached.

The MQM-74A had a neatly tapered cigar-shaped fuselage, straight mid-mounted wings, an underslung jet engine with the intake under the wings, and a conventional tail configuration with the tailplanes set in an inverted vee.

One of the tailplanes could be adjusted in incidence in flight to trim the.

The tailplane was similarly swept and had 16° of dihedral.

The fin also mounted a straight edged, fabric over ply covered tailplane.

This in turn resulted in overstressing of the wings and tailplane leading to inflight structural failure, with.

A fully movable single-piece tailplane was also adopted, which was hinged upon the rear fuselage.

scaled-down equivalent of the Victor"s crescent wing and T-tail with slab tailplane.

conventional, featuring slab all-moving tailplanes with an anhedral of 15°.

The trim toggle button on the control column caused a spontaneous retrimming of the tailplane, rapid transition to nose-heavy trim and a dive.

to test the feasibility of full yaw, pitch and roll authority without tailplanes (horizontal or vertical).

Synonyms:

horizontal stabilizer, control surface, aerofoil, horizontal tail, surface, horizontal stabiliser, airfoil,

Antonyms:

descend, outside, inside, natural object, uncover,