tailstock's Usage Examples:

The sketch also shows an adjustable tailstock with a threaded cranked handle.

Jacking up the headstock and tailstock of a lathe is nothing new, as shown by this late 1920's machine.

Inexplicably, but as on so many precision bench lathes, the tailstock barrel carried an inadequate a No.

The 10-inch lathe featured flat ways 1 1/2 inches wide with the edges of the central slot machined to guide the tailstock.

I had to reduce the tailstock spindle slightly to fit the chuck capacity of the Unimat.

Although styled to resemble the screwcutting lathes, only the tailstock handwheel and minor controls were the same.

Buy a tailstock chuck, or how else are you going to drill central holes in your work?bore headstock and tailstock were both fitted with No.

4 Morse taper tailstock was fitted with a rack drive and two clamping plates.

bench lathes, the tailstock barrel carried an inadequate a No.

tailstock of a lathe is nothing new, as shown by this late 1920's machine.

Synonyms:

support,

Antonyms:

disallow, forbid,