countersink's Usage Examples:

countersinkative brass rod is mounted onto a cast backplate with 2 countersunk screwholes for fixing.

countersinkss"ex">Countersunk holes, with or without key slots, are offered for flat head bolts.

If the back of the plate is shaped for the screw fixings, use a countersink tool to bore out a recess for these.

countersinkounted Trailer Plates have beveled edges and countersunk fixing holes, meaning the Trailer Plates have minimal projection above yard level.

countersinkbrass mounts are cranked and each has four countersunk mounting screw holes.

screw fixings, use a countersink tool to bore out a recess for these.

To allow the fitting to slide in to the housing you may have to countersink this screw.

countersink this screw.

countersinkhese are used where the holes are not countersunk at all.

countersink was then drilled and one either side, the holes were then countersunk to allow the bolts to sit flush.

countersinke countersunk head bolts with no means of holding them if they turned during attempts to remove the nuts.

countersink head to prevent clothing from getting caught on them.

Synonyms:

counterbore, countersink bit, bit,

Antonyms:

deglycerolize, disarrange, depressurise, desynchronize,