<< clamper clamps >>

clamping Meaning in Tamil ( clamping வார்த்தையின் தமிழ் அர்த்தம்)



Noun:

பற்றுக் கருவி,

Verb:

இருகப்பற்று,



clamping's Usage Examples:

The declination circle is most inconvenient of access, and slow motion in declination can only be effected when the instrument is clamped by a long and inconvenient handle; so that, practically, clamping in declination was not employed.


Young's modulus may be obtained for the material of a rod by clamping it in the middle and obtaining the frequency of the fundamental when Y 412n2p.


When clamping together protect units by using hardboard off cuts or similar behind the clamp jaws.


The aim of this study was to compare perioperative outcome of liver resections with and without intermittent hepatic pedicle clamping.


After clamping on their skies and hoisting day-packs, they set out on the groomed path.


The tubs are usually formed into sets of from 2 to 12, the front one being coupled up by a short length of chain to a clamping hook formed of two jaws moulded to the curve of the rope which are attached by the " run rider," as the driver accompanying the train is called.


4 Morse taper tailstock was fitted with a rack drive and two clamping plates.


This frame carries two very sensitive levels, k and 1, and the whole frame can be clamped to the circle g by means of the clamping screw m.


This ring is provided with a clamping screw, which, through the intervention of bevel-gear and rods, is operated by means of the hand-wheel 78.


The declination circle reads from the eye-end, and four handles for clamping and slow motion in right ascension and declination are situated near the observer's hands.


clamping bolts loosened, restart the engine and adjust the throttle idling screws on each carburetor to give the desired idling speed.


Reaching high and taking a firm grip on the rope, she lifted herself, clamping the rope between her knees and letting her feet rest on the piece of broomstick.


Why have your skilled toolmakers frittering away their time on machine tools?Clamping Mechanisms Typical clamping mechanisms include toolmakers clamps, G clamps, screw clamps, clamps based on cams.





Synonyms:

secure, fasten, fix,



Antonyms:

leave, raise, ascend, unfasten,

clamping's Meaning in Other Sites