Noun:

காய்ச்சிக்குளிரவைத்தல்,

annealing தமிழ் அர்த்தத்தின் உதாரணம்:

வெப்பப் பதனிடல் தொழில் நுட்பம் தன்மையாக்கல், காய்ச்சிக்குளிரவைத்தல், புறக்கடினப்படுத்துதல், கடினப்படுத்தல் மற்றும் வெப்பம் தணித்தல் போன்றவற்றை உள்ளடக்கியது.

annealing's Usage Examples:

Further, it was shown that the thermo-electric curves were modified both by tensile stress and by annealing in the same manner as were the change-of-length curves, the modification being sometimes of a complex nature.

carburizing wrought iron by long heating in contact with charcoal (cementation), or the proximate composition or constitution, as in the hardening, tempering and annealing of steel already described (§§ 28, 29), or both, as in the process of making malleable cast iron (§ 31).

annealing of the films in precisely controlled atmospheres showed that the ferromagnetism in our films is not linked to the carrier concentration density.

It is, however, equally important that the glass as a whole should be flat and remains flat during the process of gradual cooling (annealing), otherwise great thicknesses of glass would have to be ground away at the projecting parts of the sheet.

The second system is especially used for annealing large and heavy objects.

Consequently, for a certain focal length, much deeper curves must be resorted to if the new glasses are to be employed; this means not only greater difficulties in workmanship, but also greater thickness of glass, which militates against the chance of obtaining large disks quite free from striae and perfect in their state of annealing.

"The bowl is severed from the blowing iron, and the wine-glass is sent to the annealing oven with a bowl, longer than that of the finished glass, and with a rough fractured edge.

The sheet thus rolled is roughly trimmed while hot and soft, so as to remove those portions of glass which have been spoilt by immediate contact with the ladle, and the sheet, still soft, is pushed into the open mouth of an annealing tunnel or " lear," down which it is carried by a system of moving grids.

Certain non-magnetizable alloys of nickel, chromium-nickel and chromium-manganese were rendered magnetizable by annealing.

The joint effect of such chilling and such annealing is to make the metal much harder than if slowly cooled, because for each 1% of graphite which the chilling suppresses, 15% of the glass-hard cementite is substituted.

With repeated hammering, drawing out and annealing, it gains much in strength and toughness, and the addition of a very minute quantity of carbon converts it into steel, less tough, but of the keenest hardness.

There are also many contradictory suggestions as to why the specific contact resistivity is reduced and becomes ohmic after annealing.

Synonyms:

hardening, tempering,

Antonyms:

intensifying,