लेथमध्ये जंगम भाग असतात जे हेडस्टॉकसह संरेखित करून बेडच्या बाजूने सरकतात आणि वर्कपीसच्या मुक्त टोकाला आधार देण्यासाठी स्थितीत लॉक करण्यासाठी आधार देतात.,

tailstock's Usage Examples:

In many lathe tailstocks, the tool is removed by fully withdrawing the quill into the tailstock, which brings the tool up against.

A tailstock, also known as a foot stock, is a device often used as part of an engineering lathe, wood-turning lathe, or used in conjunction with a rotary.

In this configuration a tailstock can also be used, thus holding the workpiece "between centers.

Nowadays the surrounding objects (chuck, clamps, fixture, tailstock, and more) are included in the 3D models, and the simulation is much like.

wood is held on the lathe either by both ends (between the headstock and tailstock) or by one end only using a lathe chuck Wood is generally removed by running.

The counterpoint to the headstock is the tailstock, sometimes referred to as the loose head, as it can be positioned at any.

the headstock of the lathe which includes the drive mechanism and the tailstock support, which only rotates if its center is "live" or supported by a.

Noting signature abrasions on the tailstock, and excessive fluid in the lungs, they concluded that the animal had.

be oriented in the same direction The protruding movable shaft in the tailstock of a lathe The non-rotating shaft that houses the spindle in a pillar.

MethodFor spindle turning, the wood is held on the lathe either by both ends (between the headstock and tailstock) or by one end only using a lathe chuck Wood is generally removed by running a turning tool down the slope of the wood from a larger diameter in the wood to a smaller diameter.

lathe e) using a form tool f) by the offsetting of the tailstock - this method more suited for shallow tapers.

part is long then it may be supported with the help of an accompanying tailstock.

several spindles, such as the headstock and tailstock spindles on a bench lathe.

Synonyms:

support,

Antonyms:

disallow, forbid,