Noun:

ಯಂತ್ರೋಪಕರಣಗಳು, ಗೇರ್, ವಿಷಯ, ಉಡುಪು, ರಕ್ಷಾಕವಚ, ಸಜ್ಜು, ಕುದುರೆ ಸರಂಜಾಮು, ಗೃಹೋಪಯೋಗಿ ವಸ್ತುಗಳು,

Verb:

ಸಕ್ರಿಯಗೊಳಿಸಿ, ಬಟ್ಟೆ ಹಾಕಿಕೊಳ್ಳು, ಗೇರ್ ಆನ್ ಮಾಡಿ, ಕಾರ್ಯಗತಗೊಳಿಸಿ, ಸಿದ್ದನಾಗು,

gears ಕನ್ನಡದಲ್ಲಿ ಉದಾಹರಣೆ:

ದೀರ್ಘವೃತ್ತಾಕಾರದ ಗೇರುಗಳು .

ಫರಿದಾಬಾದ್‌ ನಗರವು ಗೋರಂಟಿ ಉತ್ಪಾದನೆಗೆ ಪ್ರಸಿದ್ಧವಾಗಿದ್ದು, ಟ್ರಾಕ್ಟರುಗಳು, ಮೋಟಾರ್‌ಸೈಕಲ್ಲುಗಳು, ಸ್ವಿಚ್‌ ಗೇರುಗಳು, ರೆಫ್ರಿಜರೇಟರುಗಳು, ಬೂಟುಗಳು ಮತ್ತು ಟೈರುಗಳು ನಗರದ ಇತರ ಪ್ರಸಿದ್ಧ ಕೈಗಾರಿಕಾ ಉತ್ಪನ್ನಗಳಾಗಿವೆ.

ಬಾಗು ಬಿಗಿತ(Bending Stress)(ವಿಕಸನ ಅಥವಾ ಸಂಕೋಚನ)-ಇದು ಶಾಫ್ಟ್ ಗಳಲ್ಲಿ ಅಳವಡಿಸಲಾಗಿರುವ ಗೇರುಗಳು ಹಾಗೂ ರಾಟೆಗಳ ಮೇಲೆ ಬೀಳುವ ಬಲ ಮತ್ತು ಶಾಫ್ಟಿನ ಸ್ವಂತ ತೂಕದಿಂದ ಚೋದಿತವಾಗುತ್ತದೆ.

ಗಡಿಯಾರಗಳ ಗೇರುಗಳು ಮತ್ತು ಅವುಗಳ ಚಲನ ನಿಯಂತ್ರಣ.

gears's Usage Examples:

Clockmaking: dovetailing a new tooth, when replacing broken teeth in clock gears.

Mechanical actuators typically convert rotary motion of a control knob or handle into linear displacement via screws and/or gears to which the knob or handle is attached.

From the 13th century onwards, India began widely adopting mechanical technologies from the Islamic world, including water-raising wheels with gears and pulleys, machines with cams and cranks, papermaking technology, and the spinning wheel.

The gearshift lever knob, pedal assembly, foot rest and door sill are in aluminium.

where they stated that the most likely cause to the accident was a fatigue fracture in one of the second stage planet gears.

Bégearss is arrested as a traitor to the Revolution and dragged off, the Almavivas leave and Beaumarchais, after bidding a fond farewell to his favorite creation (i.

The same gear ratio is obtained for a sequence of idler gears and hence an idler gear is used to provide the same direction to rotate the driver and driven gear.

Its force is transmitted through a series of gears to power the balance wheel, a weighted wheel which oscillates back and forth at a constant rate.

basically a manual transmission with a transmission control unit (TCU) that actuates the hydraulics to shift the gears.

feature a steering wheel, a gearshift for low and high gears, and an accelerator pedal.

Group structureThe Eicher Group has diversified business interests in design and development, manufacturing, and local and international marketing of trucks, buses, motorcycles, automotive gears, and components.

FormulaThe teeth on gears are designed so the gears can roll on each other smoothly (without slipping or jamming).

close-ratio transmissionA close-ratio transmission is a transmission in which there is a relatively little difference between the gear ratios of the gears.

Synonyms:

adapt, popularize, pitch, popularise, accommodate,

Antonyms:

forward, obverse, head, synchronize, correct,