એમ્પીયરનો એક હજારમો ભાગ,

Noun:

મિલિએમ્પીયર કલાક,

milliamperes's Usage Examples:

applied externally to the patient"s head resulting in approximately 800 milliamperes of direct current passed through the brain, for 100 milliseconds to 6.

secondary winding resistance of 4000 ohms and a secondary current of 400 milliamperes.

3 milliamperes per square centimeter of silicon.

In comparison with the [laser]s, which require just a few milliamperes of input current, the current used for pumping the krypton laser is several amperes, since the gas has to be ionized.

larger than 20 mm in diameter and operating on a current of 120 to 240 milliamperes.

Practical tunnel diodes operate at a few milliamperes and a few tenths of a volt, making them low-power devices.

A brief-pulse electric current of about 800 milliamperes is passed between two electrodes on the head for several seconds, causing.

potentiometers are constrained by current limit in the range of tens of milliamperes.

is interrupted by the current falling too low for too long (under 10 milliamperes for more than 100 microseconds for the KN22 krytrons).

standard domestic mains electrical installation, but may be as low as a few milliamperes in a separated extra-low voltage (SELV) system or as high as hundreds.

polar was used when a 60 milliampere connection could not be achieved, provided a ground return polar circuit using 35 milliamperes on separate send and receive.

switching currents are often required in the range of several hundred milliamperes, or even in the range of amperes.

3-volt heater from 320 milliamperes to 150 milliamperes while maintaining the same conversion transconductance (550.