Adverb:

તમે ગમે તે કરો, બધા કિસ્સાઓમાં, કોઈપણ રીતે, પરિસ્થિતિ ગમે તે હોય,

keyway's Usage Examples:

Commonly machined surfaces include circular and non-circular holes, splines, keyways, and flat surfaces.

An alternative to splines is a keyway and key, though splines provide a longer fatigue life, and can carry significantly.

Commonly machined surfaces include circular and non-circular holes, splines, keyways, and.

Lock keyway shapes vary widely with lock manufacturer, and many.

Rotational drive uses the sliding keyways that open to the end of the shank, which mate with keys in the chuck.

seconds, or for those players who are leaving (or attempting to leave) the keyway.

For a key to function, the shaft and rotating machine element must have a keyway and a keyseat, which is a slot and pocket in which the key fits.

metal consisting of two parts: the bit or blade, which slides into the keyway of the lock and distinguishes between different keys, and the bow, which.

The plug has a straight-shaped slot known as the keyway at one end to allow the key to enter the plug; the other end may have a.

are two basic types of tension: "bottom of the keyway" and "top of the keyway".

The blank has a specific cross-sectional profile to match the keyway in a corresponding lock cylinder.

As the key slides into the lock through the keyway, the wards align with the grooves in the key"s profile to allow or deny.

major keyway is 4 mm deep, and there is a corresponding flat protruding into the interior of the shroud to accommodate it.