રોલ સ્ટીલ શીટ,

Noun:

જોગિંગ,

cogging's Usage Examples:

, generative measurements, measurements of cogging torque, discharge measurements.

ironworks, included three 17-ton furnaces of the open-hearth type, a 30 inch cogging mill and a 28 inch finishing mill.

Cogging may refer to: Cogging torque, an undesirable component in the operation a motor Forge cogging, successive deformation of a bar along its length.

The cogging stand reduced the 12-inch-square.

frequency disturbances such as floor vibration, acoustic noise, motor cogging, bearing jitter and cable carrier rattling, HPPS may employ structural.

is that they rotate in steps rather than continuously – the resulting "cogging" can add noise during playback.

The cogging points with no.

processes include: roll forging, swaging, cogging, open-die forging, impression-die forging(close die forging), press forging, cold forging automatic.

magnets have a resonant position holding torque (called detent torque or cogging, and sometimes included in the specifications) when not driven electrically.

This is to reduce cogging torque and create a sinusoidal back emf.

Most motors exhibit positional torque ripple known as cogging torque.

multidirectional flow Common forging processes include: roll forging, swaging, cogging, open-die forging, impression-die forging(close die forging), press forging.

motor are the cogging points of the rotor, which differ depending on whether the stator coil is energized or unenergized.

Synonyms:

gear wheel, tooth, sprocket, gear, geared wheel, cogwheel,

Antonyms:

primary, superior, dominant, insubordinate, domineering,