Noun:

ਲੱਕੜ ਦੀ ਝਰੀ, ਲੱਕੜ ਵਿੰਨ੍ਹਣਾ,

mortises's Usage Examples:

One of the pins is adjustable, attached to a sliding fence, so that mortises of different widths can be marked.

The spacing between mortises and the width of the mortises is very tight and they also appear to be slightly wider.

In traditional timber frame joinery, mortises and tenons were typically two inches (51 mm) wide and two inches (51 mm).

pieces are mortised and the tenon is a separate piece that fits into both mortises.

Mortise chisel thick, rigid blade with straight cutting edge and deep, slightly tapered sides to make mortises and similar joints.

Timber-framed construction, carefully fitted with mortises and tenons and dowelled together, set on stone footings, were the rule, replaced by stone buildings.

Self-referencing pins allow the cutting of rows of evenly spaced mortises with no need to measure and mark.

The horizontal timbers are tenoned into mortises chiseled into the posts.

consists of cutting two mortises into the edges of two planks, a separate rectangular tenon is then inserted in the two mortises.

dovetails, mortises, and tenons, moldings of infinite varieties, dados, rabbets/rebates, raised-panel doors and frames, cutting circles, and so much more.

Among interlocking joints he recognizes miters, rabbets, dovetails, and mortises; under releasable attachments he describes plugs.

This type of carpentry has a frame with horizontal beams or logs tenoned into slots or mortises in the posts.

In traditional timber frame joinery, mortises and tenons were typically two inches (51 mm) wide and two inches (51 mm) from the edge.

Synonyms:

mortice, join, bring together,

Antonyms:

deflate, lengthen, inflate, disjoin,