trunnion's Usage Examples:

straight sides of the pie shape, the trunnion arms, extend back from each end of the cylinder section and meet at a trunnion which serves as a pivot point when.

The Mod 1 had no trunnions and were not hooped to the muzzle.

The advantage of rear-positioned trunnions is that the breech doesn"t "disappear" into a box trail as is the case with trunnions mounted.

Flanges, trunnions, clevises, and lugs are common cylinder mounting options.

A trunnion (from Old French "trognon", trunk) is a cylindrical protrusion used as a mounting or pivoting point.

The replacement of trunnions by a bolt underneath, to connect the gun to the mounting, reduced the.

In general, cabinet-mounted trunnions are easier to adjust than table-mounted trunnions.

is pinned to the receiver in a modified trunnion, reinforced by ribbing, and is slightly wider than the trunnion used on the standard AKM type rifles.

perform as cylinder mounting components [cap flange, cap trunnion, cap clevis].

1, light blue) has two large round trunnions (or arc-shaped rails for larger telescopes) secured on the left and right.

bore was bored out to proper size, the exterior was turned smooth, the trunnions were turned on a trunnion lathe, and a vent was drilled.

tube, jacket, 19 hoops and an elevating band with integral trunnions.

5mm stamped receiver with bulged RPK style front trunnion) or N-PAP (1.