जाड फळी लाकडी जहाजाच्या बाजूने कड बनवतात,

strake's Usage Examples:

On a vessel"s hull, a strake is a longitudinal course of planking or plating which runs from the boat"s stempost (at the bows) to the sternpost or transom.

Working upward come the bottom strakes, lowers.

A wale is one of the strakes of wooden planking that forms the outer skin of the hull of a ship, but substantially thicker than the other strakes.

During the industrial age, iron strakes were replaced by a solid iron tyre custom made by a blacksmith after the.

keel, from the bow to the stern; these may variously be called stringers, strakes, or clamps.

The strakes, which are attached to the keel by the uniquely Austronesian technique of sewing them with a combination of dowels and lashed lugs instead of nails, can also be made from mastwood, but it is more commonly made from other softer timber species like Artocarpus.

However, evidence of caulking, found on the upper edges of the bilge strakes clearly suggests that the.

extended leading edge that may be considered as a wing strake; it provides the same additional vortex lift at high angle of attack by leading edge suction.

adjacent to the hatchways were already badly worn, as were the strakes along the hull.

A gripe is a simple form of clamp used in building a clinker boat, for temporarily holding the strake which is being fitted onto the one to which it is.

The strake is relatively thin and wide, so the.

[3] The hull, typically, consists of four strakes each side, the garboard strakes being wide giving a flat run to the transom whilst having a fairly.

The main wing incorporated forebody strakes to enhance vortex generation for high angle of attack maneuverability, negative stability for improved subsonic lift and reduced supersonic drag.

Synonyms:

board, gun rest, wale, gunnel, plank, gunwale, vessel, watercraft, garboard, garboard strake, garboard plank,

Antonyms:

exit, get off, disembark, starve, live out,