Noun:

चुंबक,

ferrite's Usage Examples:

into bainite or martensite, but rather have it completely transform to pearlite and ferrite or cementite.

Permanent magnets are made from "hard" ferromagnetic materials such as alnico and ferrite that are subjected to special processing in a strong magnetic.

Unlike iron-based alloys, most heat-treatable alloys do not experience a ferrite transformation.

Hard ferrites have high coercivity, so are difficult to demagnetize.

two-phased, lamellar (or layered) structure composed of alternating layers of ferrite (87.

transforming to a cementite and ferrite mixture can be explained using the sigmoidal curve; for example the beginning of pearlitic transformation is represented.

forms a laminated structure composed of alternating layers of ferrite and cementite, becoming soft pearlite.

The Mark IV used magnetic drum and had 200 registers of ferrite magnetic core memory (one of the first computers to do so).

Many inductors have a magnetic core made of iron or ferrite inside the coil, which serves to increase the.

steel) will contain a corresponding proportion of relatively pure ferrite crystallites that do not participate in the eutectoid reaction and cannot transform.

uses toroids (rings) of a hard magnetic material (usually a semi-hard ferrite) as transformer cores, where each wire threaded through the core serves.

The rate of cooling determines the relative proportions of martensite, ferrite, and.

In electronics, a ferrite core is a type of magnetic core made of ferrite on which the windings of electric transformers and other wound components such.

Synonyms:

alpha iron, solid solution, primary solid solution, pearlite,