Noun:

पेंट-वेल्डिंग,

desoldering's Usage Examples:

extremely difficult, technical, and expensive, since it may require desoldering of integrated circuit chips from the circuit board of the device they.

prior to resoldering — desoldering braids (or wicks) or vacuum desoldering equipment (solder suckers) can be used.

an electronic printed circuit board (PCB) assembly, usually involving desoldering and re-soldering of surface-mounted electronic components (SMD).

limited reuse may be possible, more than a few cycles of soldering and desoldering are likely to render both the components and the board unusable.

widely used in the electronics industry as a method of soldering and desoldering components onto circuit boards.

Without developed skill, when manually soldering or desoldering a component, it is easy to accidentally reflow the solder of an adjacent.

pickup tool, and a soldering head; a desoldering station will have a desoldering head with vacuum pump for desoldering through-hole components, and a soldering.

This may require desoldering the dead battery and soldering the replacement in place.

This is easily repairable by desoldering the tuner shield and re-flowing new solder to each connection inside.

melting point, close to that of the material itself, to prevent the joint desoldering during firing in the enameling process.

destroy the chip and its content because of the heat required during desoldering.

mechanical removal of the cover using a milling machine, saw blade or by desoldering and cutting.

The unit does not have enough power for effective desoldering of many board- and chassis-mounted components.