पासून आयन काढा,

deionized's Usage Examples:

of mercuric chloride and 40 g of ferric nitrate in 850 ml of type II deionized water, and then adding 10 ml of concentrated hydrochloric acid to the.

formation can be avoided by feeding deionized or distilled water to the boiler.

use inexpensive tap water, but this requires higher blowdown rates than deionized or distilled water.

In deionized and distilled water, a SAP may absorb 300 times its weight (from 30 to.

Suspend the solids in ~800 ml of distilled or deionized water.

The wafers are also washed with deionized water throughout the process, which helps prevent contamination.

5 g/L NaCl) Preparation The following is a common method for the preparation of 1 litre of LB:Measure out the following:*10 g tryptone*5 g yeast extract*10 g NaClSuspend the solids in ~800 ml of distilled or deionized water.

Add further distilled water or deionized water, in a measuring cylinder to ensure accuracy.

the deionized water system.

If an aqueous subphase is used, the water must be purified to remove organics and deionized to a resistivity not less than 1.

UPW and commonly used term deionized (DI) water are not the same.

High quality deionized water has a conductivity of about 0.

Synonyms:

get rid of, remove,

Antonyms:

kern, muzzle, bridle,