ವಿಮಾನದ ಬಾಲದ ಜೋಡಣೆಯ ಸಮತಲ ಏರ್‌ಫಾಯಿಲ್ ಅನ್ನು ಸ್ಥಿರಗೊಳಿಸಲಾಗಿದೆ ಮತ್ತು ಅದನ್ನು ಲಿಫ್ಟ್‌ನ ಮೇಲೆ ಹಿಂಜ್ ಮಾಡಲಾಗಿದೆ,

tailplanes's Usage Examples:

The MQM-74A had a neatly tapered cigar-shaped fuselage, straight mid-mounted wings, an underslung jet engine with the intake under the wings, and a conventional tail configuration with the tailplanes set in an inverted vee.

One of the tailplanes could be adjusted in incidence in flight to trim the.

conventional, featuring slab all-moving tailplanes with an anhedral of 15°.

to test the feasibility of full yaw, pitch and roll authority without tailplanes (horizontal or vertical).

the fuselage a large triangular fin, with rudder, supported the biplane tailplanes, which were also strut-braced.

resulting pressurisation of the tail section caused the surfaces of the tailplanes to separate, weakening them to the point that they broke off.

The Model 42 was essentially an Airco DH-4M-1 fitted with new Boeing tailplanes, tapered wings, and tripod landing gear.

received a more powerful engine and modifications to the overly tall tailplanes.

The loads on the wings and tailplanes are usually carried by multiple load paths.

The three-piece tailplanes of GEAT jet-powered UAV are arranged in Y shape, as opposed to the inverted.

It was intended to test the feasibility of full yaw, pitch and roll authority without tailplanes (horizontal.

conversion kit consists of a front "seeker" section and a set of steerable tailplanes.

was quite complicated with a biplane arrangement of tailplanes and elevators.

Synonyms:

airfoil, horizontal stabiliser, surface, horizontal tail, aerofoil, control surface, horizontal stabilizer,

Antonyms:

uncover, natural object, inside, outside, descend,