Noun:

ಪ್ರಾಂತ್ಯ,

bandpass's Usage Examples:

A bandpass-filtered signal (that is, a signal with energy only in a passband), is known as.

receivers, this is accomplished by a bandpass filter in the RF front end.

In signal processing, undersampling or bandpass sampling is a technique where one samples a bandpass-filtered signal at a sample rate below its Nyquist.

is used intentionally on signals with no low-frequency content, called bandpass signals.

A bandpass filter typically has two stopbands.

The noise filters are controlled by signals derived from bandpass filters, not from a correlation process.

the bandpass filter allows the frequency of the desired radio transmission to pass through, and blocks signals at all other frequencies.

Also see undersampling for information about decimating bandpass functions and signals.

because signal strength is initially unknown, (3) narrow bandpass to discriminate the signal of interest from other electromagnetic radiation on nearby.

ideal bandpass filters defines a decomposition known as Shannon wavelets (or sinc wavelets).

or a band of wavelengths, blocking both longer and shorter wavelengths (bandpass).

Single-sideband modulation uses bandpass filters to eliminate one of the sidebands and possibly.

dynamic range because signal strength is initially unknown, (3) narrow bandpass to discriminate the signal of interest from other electromagnetic radiation.