स्प्लिस हिंदी उपयोग और उदाहरण

"" दो फाइबर ऑप्टिकल को जोड़ने का काम फ्युज़न स्प्लिसिंग या यांत्रिक स्प्लिसिंग द्वारा किया जाता है और इसे विशेष कौशल और एक दूसरे का संबंध फाइबर प्रौद्योगिकी की वजह से संरेखित करने के लिए आवश्यक सूक्ष्म परिशुद्धता की आवश्यकता होती है।

क्षीणन के अन्य रूपों का कारण फाइबर का प्राकृतिक खिंचाव है, घनत्व में सूक्ष्म उतार चढ़ाव, अपूर्ण और स्प्लिसिंग तकनीकों को प्राकृतिक जोर दिया गया है।

स्प्लिस इसके अंग्रेजी अर्थ का उदाहरण

Breakout cable is suitable for short riser and plenum applications and also for use in conduits, where a very simple cable run is planned to avoid the use of any splicebox or spliced fiber pigtails.

It is generally installed in closet area like rack mount or wall mount splice boxes or patch panels.

The major advantage of these all fiber systems, where the free space mirrors are replaced with a pair of fiber Bragg gratings (FBGs), is the elimination of realignment during the life of the system, since the FBG is spliced directly to the doped fiber and never needs adjusting.

The challenge is to operate these monolithic cavities at the kW CW power level in large mode area (LMA) fibers such as 20/400 (20"nbsp;μm diameter core and 400"nbsp;μm diameter inner cladding) without premature failures at the intra-cavity splice points and the gratings.

However, the packaging and optimization of the splices and FBGs themselves are non-trivial at these power levels as are the matching of the various fibers, since the composition of the Yb-doped fiber and various passive and photosensitive fibers needs to be carefully matched across the entire fiber laser chain.

Although the power handling capability of the fiber itself far exceeds this level, and is possibly as high as >30"nbsp;kW CW, the practical limit is much lower due to component reliability and splice losses.

The matching of active and passive fibers for improved signal integrity requires optimization of the core/clad concentricity, and the MFD through the core diameter and NA, which reduces splice loss.

As an example, passive fibers with clad diameters of 395-μm spliced to active octagon shaped fiber with clad diameters of 400-μm improve the coupling of the pump power into the active fiber.

An image of such a splice is shown, showing the shaped cladding of the doped double-clad fiber.

The termination points: While the length of the MI cable is very tough, at some point, each run of cabling terminates at a splice or within electrical equipment.

In addition to the membrane-bound tissue factor, soluble form of tissue factor was also found which results from alternatively spliced tissue factor mRNA transcripts, in which exon 5 is absent and exon 4 is spliced directly to exon 6.

Two alternatively spliced transcript variants of this gene encoding distinct isoforms have been reported.

The transcribed RNA is then spliced and modified in the nucleus before reaching the cytoplasm and being translated into an inactive form of OAS.