<< तोरसे धड >>

मरोड़ संबंधी Meaning in English



मरोड़ संबंधी शब्द का अंग्रेजी अर्थ : torsional


मरोड़-संबंधी इसके अंग्रेजी अर्थ का उदाहरण

The product JTG is called the torsional rigidity wT.


In the case of thin hollow shafts, a twisting buckling mode can result from excessive torsional load, with wrinkles forming at 45° to the shaft axis.


Frames made at Bontrager's Santa Cruz workshop had two-piece seat stays made of larger diameter tubing in the upper area which added torsional stiffness around the brake-bosses, while the smaller tubes in the lower area reduced weight and vertical stiffness of the rear triangle leading to better damping of hits.


When turning, only one edge of the ski is in contact with the snow, and in a traditional ski design, this pressure causes both the turning force as well as a torsional force on the ski, making it want to flatten out on the snow and lose the edge.


The swallowtail allows the two tips to move independently, reducing this torsional force and, in theory, keeping the edge in firm contact.


In any case, wooden skis of this era did not provide the torsional stiffness required to benefit from the performance sidecut now adds.


A contemporary ski's torsion box design greatly improved torsional stiffness and would allow even greater sidecut to be effective.


As part of that work and to compensate for the loss of lateral and torsional stiffness of the new deck, a steel undertruss was installed.


Thin-walled beams are ultimately limited by local buckling and lateral-torsional buckling.


The power flow from the engine crankshaft to the transmission input shaft was connected via a flywheel containing a set of springs to absorb torsional vibrations at the flexplate.


Vergence is also denoted according to its direction: horizontal vergence, vertical vergence, and torsional vergence (cyclovergence).


the butterfly bending angle or folding angle ψ is defined as the angle between two planes and can be obtained by averaging the two torsional angles R1CCR3 and R2CCR4.


Penams are primarily destabilized because of the large angle and torsional strains that are associated with the four-member β-lactam ring, whose internal bond angles are 90º.





मरोड़ संबंधी Meaning in Other Sites