पुशरॉड हिंदी उपयोग और उदाहरण

इस आधारभूत मॉडल को कच्चे-लोहे के ब्लॉक वाले 4.0 एल एसओएचसी वी6 (4.0 L SOHC V6) से शक्ति प्राप्त होती है, जिसकी जगह पहले 3.8 एल पुशरॉड वी6 का इस्तेमाल किया जाता था।

"" सन् 1994 और सन् 1995 के मस्टैंग जीटी (Mustang GT) में शुरू में इस्तेमाल किए जाने वाले 302 सीआईडी (302 cid) पुशरॉड स्मॉल-ब्लॉक वी8 को फोर्ड (Ford) ने लगभग 40 वर्षों के इस्तेमाल के बाद सेवा से मुक्त किया और इसकी जगह सन् 1996 के मस्टैंग जीटी में नवीन मॉड्यूलर 4.6 एल (281 सीआईडी) एसओएचसी वी8 (4.6 L (281 cid) SOHC V8) का इस्तेमाल किया।

पुशरॉड इसके अंग्रेजी अर्थ का उदाहरण

Braking is via six-piston aluminum monobloc calipers and carbon ceramic discs, mounted on suspension controlled by four-way adjustable spring/damper units activated by pushrods with adjustable torsion-bar springs.

Engine displacement: pushrod V8.

The flight controls of the Falcon 20 are [augmenting the mechanical pushrods between the cockpit controls and the Vladimir Dimitrov"nbsp;— Maystora (Владимир Димитров"nbsp;— Майстора) (1 February 1882 "ndash; 29 September 1960), was a Bulgarian painter, draughtsman and teacher.

The R90S' type 247 "airhead" engine was a pushrod OHV, two valve per cylinder, air-cooled flat-twin "boxer" unit.

In 1926 this was succeeded by the model R, which produced similar performance with an OHV pushrod engine.

Power output from the race-tuned version of the pushrod overhead valve engine was 24"nbsp;bhp.

These cars featured a unique water-cooled, horizontally opposed four-cylinder engine, with overhead valves operated by pushrods.

One end is raised and lowered by a rotating lobe of the camshaft (either directly or via a tappet (lifter) and pushrod) while the other end acts on the valve stem.

For pushrod engines, roller rockers employ a roller where the rocker contacts the valve stem.

This helps to reduce cam lobe friction and wear in the same way as roller lifters on pushrod engines.

The effective leverage of the arm (and thus the force it can exert on the valve stem) is determined by the rocker arm ratio, the ratio of the distance from the rocker arm's center of rotation to the tip divided by the distance from the center of rotation to the point acted on by the camshaft or pushrod.

For this reason, aluminum is often used for high performance, aftermarket rocker arms for pushrod engines as well as many OEM rocker arms on OHC engines.