निकास-पाइप हिंदी उपयोग और उदाहरण

"" प्रौद्योगिकी में पीछे के दाब में सुधार करने के लिए इंजन निकास पाइप के साथ संयोजित एक छोटे कक्ष का उपयोग एवं छल्लेदार विशेषताएं शामिल है, जिसका उद्देश्य किफाइती बाइकों के प्रदर्शन में सुधार करना है।

प्रौद्योगिकी में पीछे के दाब में सुधार करने के लिए इंजन निकास पाइप के साथ संयोजित एक छोटे कक्ष का उपयोग एवं छल्लेदार विशेषताएं शामिल है, जिसका उद्देश्य किफाइती बाइकों के प्रदर्शन में सुधार करना है।

निकास-पाइप इसके अंग्रेजी अर्थ का उदाहरण

The hybrid program was abandoned, leaving Uhlenhaut to appropriate one of the leftover mules as a company car with only a large suitcase-sized muffler added to dampen its near-unsilenced exhaust pipes.

A crossover exhaust pipe is used to remove exhaust from the left bank of engine cylinders to the right side of the engine compartment.

This crossover joins the right bank exhaust pipe and exits along the lower right side of the engine compartment.

Unlike wood stoves, which operate exclusively on a principle of chimney draft, a pellet stove must use a specially sealed exhaust pipe to prevent exhaust gases escaping into the living space due to the air pressure produced by a combustion blower.

Assembled by the MFP's mechanic, Barry, it features port exhaust pipes and a Weiand "blower" supercharger (nonfunctional film props).

The ASV has three openings: one is connected to the manifold vacuum, another is connected to the exhaust pipe and the third is open to the atmosphere.

The original "iron barrel" style engine did this with a hose from the PAV going to the exhaust pipe, the newer (2003–2009) AVL aluminum engine pulses the gas directly into the exhaust port on the head of the engine itself.

When fitted with the C-type head, 2-inch sand-cast H8 carburettors, heavier torsion bars and twin exhaust pipes, the car was designated XK140 SE in the UK and XK140 MC in North America.

This time, he succeeded, dying in his fume-filled car in his garage with a hose attached to the exhaust pipe, and was found dead soon after.

Most pulsejet engines use independent intake and exhaust pipes.

One aperture can act as exhaust pipe during the high-pressure phase of the work cycle and as intake during the aspiration phase.

It was only sold in California in 1985, as the RZ350NC, and a second version was sold in late 1985 and 1986 as the RZ350NC2, both of which had an EVAP canister and an additional catalytic converter in the exhaust pipe header to meet California emission regulations.