झाग-निकलना इसके अंग्रेजी अर्थ का उदाहरण

In particular, [cyanide] is recognised as a significant contributor to the fire toxicity of PIR (and PUR) foams.

The consistency of the dessert ranges from a thin, frothy liquid to a thick foam, which is determined by the amount of water added to the recipe.

Seafoam - Vibes - Guidance.

In the UK (and other parts of the EU), 'insulated' roller garage doors are available, using an aluminium lathe filled with polyurethane foam for thermal and acoustic insulation.

Its skeleton was made from duralumin (an alloy used in aircraft frames) and its skin was vulcanized foam rubber.

Shannon noted that the initial imagery given to the engineering team showed "absolutely nothing of concern", with only one foam piece appearing to possibly impact the vehicle, 440 seconds into ascent.

Support is the foam’s ability to "push back" against your body weight, and prevent the foam from "bottoming out" on the frame or base.

Paddlers kneel on a foam or cushioned block to stabilize their knee, and often have foot braces to secure their position.

Acoustic foam panels typically suppress reverberations in the mid and high frequencies.

The sculpture consists of steel cages and inside is two life-size figures carved in Styrofoam facing each other.

The piece consists of 15 photographs of his face where he is covered in what appears to be sea foam.

The word "Musquodoboit" is derived from the Mi’kmaq language and means "rolling out in foam".

Special forces entered the building from the roof, the windows and the ground, while the house was covered in foam to diminish the effectiveness of possible counterattacks such as Molotov cocktails.

झाग-निकलना इसके अंग्रेजी अर्थ का उदाहरण

In humans, this is sometimes known as pigment dispersion syndrome.

Multi-mode fiber has a fairly large core diameter that enables multiple light modes to be propagated and limits the maximum length of a transmission link because of modal dispersion.

Because multi-mode fiber has a larger core-size than single-mode fiber, it supports more than one propagation mode; hence it is limited by modal dispersion, while single mode is not.

This chromatic dispersion is another limit to the useful length for multi-mode fiber optic cable.

Because of the modal dispersion, multi-mode fiber has higher pulse spreading rates than single mode fiber, limiting multi-mode fiber's information transmission capacity.

The two types have different dispersion characteristics and thus different effective propagation distance.

This requires the SFP+ interface to support electronic dispersion compensation (EDC) however, so not all switches, routers and other equipment can use these SFP+ modules.

VCSEL power profiles, along with variations in fiber uniformity, can cause modal dispersion which is measured by differential modal delay (DMD).

Modal dispersion is caused by the different speeds of the individual modes in a light pulse.

The greater the length, the greater the modal dispersion.

To combat modal dispersion, LOMMF is manufactured in a way that eliminates variations in the fiber which could affect the speed that a light pulse can travel.

A grating possessing a chirp has the property of adding dispersion—namely, different wavelengths reflected from the grating will be subject to different delays.

This property has been used in the development of phased-array antenna systems and polarization mode dispersion compensation, as well.