कौंधक इसके अंग्रेजी अर्थ का उदाहरण

Patrol units also use red and blue LEDs facing to the rear of the vehicle and in some forward facing pushbars, as well as headlight and tail light flashers.

This bell has appeared on advertising literature for railroad signals as far back as the 1920s as far abroad as Chile and Italy on early wig wag crossings and flashers.

This was a unique combination of highway flasher and rotating stop sign (similar to a school bus stop sign).

The Fronte soon received a very minor update reflecting stricter safety laws; as of October 1968 it sported a driver's side integrated headrest, seat belts up front, and turn signal flashers on all four corners.

कौंधक हिंदी उपयोग और उदाहरण

"" हिगिंसन लिखते हैं, 'जब कोई विचार कौंधकर हमें चकित कर दे, व्याकरण की सीख देना अशिष्टता लगती है।

हिगिंसन लिखते हैं, 'जब कोई विचार कौंधकर हमें चकित कर दे, व्याकरण की सीख देना अशिष्टता लगती है।

कौंधक इसके अंग्रेजी अर्थ का उदाहरण

In humans, this is sometimes known as pigment dispersion syndrome.

Multi-mode fiber has a fairly large core diameter that enables multiple light modes to be propagated and limits the maximum length of a transmission link because of modal dispersion.

Because multi-mode fiber has a larger core-size than single-mode fiber, it supports more than one propagation mode; hence it is limited by modal dispersion, while single mode is not.

This chromatic dispersion is another limit to the useful length for multi-mode fiber optic cable.

Because of the modal dispersion, multi-mode fiber has higher pulse spreading rates than single mode fiber, limiting multi-mode fiber's information transmission capacity.

The two types have different dispersion characteristics and thus different effective propagation distance.

This requires the SFP+ interface to support electronic dispersion compensation (EDC) however, so not all switches, routers and other equipment can use these SFP+ modules.

VCSEL power profiles, along with variations in fiber uniformity, can cause modal dispersion which is measured by differential modal delay (DMD).

Modal dispersion is caused by the different speeds of the individual modes in a light pulse.

The greater the length, the greater the modal dispersion.

To combat modal dispersion, LOMMF is manufactured in a way that eliminates variations in the fiber which could affect the speed that a light pulse can travel.

A grating possessing a chirp has the property of adding dispersion—namely, different wavelengths reflected from the grating will be subject to different delays.

This property has been used in the development of phased-array antenna systems and polarization mode dispersion compensation, as well.