ପ୍ରଥମ ୱାଲ୍ ଏକ କାଠ ଜାହାଜର ତଳ ପାଖରେ ରହିଲା |,

garboard's Usage Examples:

5" Plank, garboard to topside in elm and Dantzic oak, decks 3.

The keel was an inverted T shape to accept the garboard planks.

The deck-beams, the stringers, the garboard-strake, the triple-expansion engine and other parts, have particular functions.

5 in × 15 in (42 cm × 38 cm), had on either side a garboard strake, 11 in × 12 in (28 cm × 30 cm), and then 6 in (15 cm) planking decreasing.

and the lands were glued with no fastenings, except that the ends and garboards were still screwed to apron and hog.

The keel has been cut to receive the lower edges of the garboards, which had been spiked to it as well as treenailed through the timbers.

strakes immediately adjacent to either side of the keel are known as the garboard strakes or A strakes.

The keel, or keelplank, was only slightly thicker than the adjacent garboards and had no rabbet.

From the hog, the garboard, bottom, bilge, topside and sheer strakes are planked up, held together.

75", garboard strake 12" x 10" made of American Rock elm.

garboard strakes or A strakes.

garboard The strake closest to the keel (from Dutch gaarboard).

The garboard planks are narrow and remain only slightly.