Noun:

ಎರಡನೇ ಗೇರ್‌ನಲ್ಲಿ ನಿರ್ಮಿಸಲಾಗಿದೆ,

second gear's Usage Examples:

because it preserves engine braking by eliminating a sprag between first and second gears.

or second gear can be directly selected from neutral, but higher gears may only be accessed in order – it is not possible to shift from second gear to.

These positions are often labelled "L" (low gear), "S" (second gear) or the number of the highest gear used in that position.

, shifting from third gear to second gear), operated either via electronic paddle-shifters mounted.

Unlike the early automatic Mark VII predecessor, (but like late mark VII and all Mark VIII) the Borg Warner DG automatic gearbox started in first gear and had a dash-mounted switch to allow second gear to be held indefinitely.

common way to push start a vehicle is to put the manual transmission in second gear, switching the ignition to on/run, depressing the clutch, and pushing.

For the close-ratio transmission, first gear has a 4:1 ratio or 4, and second gear has a ratio of 3:1 or 3, so the progression between gears is 4/3, or 133%.

an engine shaft to drive shaft ratio of 4:1 in first gear and 2:1 in second gear would be considered wide-ratio when compared to another transmission.

shifting from second gear to third gear), in a successive order.

For the wide-ratio transmission, the first gear ratio is 4:1 or 4, and in second gear it is 2:1 or 2, so the progression is equal to 4/2 2 (or 200%).

name "SelectShift" because if the transmission was placed in first or second gear, the transmission would only use that gear selected from a standing stop.

includes one overdrive gear, a light-weight aluminum housing, multi-cone synchronizers on first and second gear, and a synchromesh reverse gear.

the second gear cogs are engaged.

Synonyms:

motor vehicle, gear, gear mechanism, automotive vehicle, second,

Antonyms:

cardinal, disagreement, former,