सिंटरिंग हिंदी उपयोग और उदाहरण

एन्थ्रेसाइट के कुछ ग्रेडकोयला का उपयोग सिंटरिंग , पुलवराइज़्ड कोल इंजेक्शन , डायरेक्ट ब्लास्ट फर्नेस चार्ज, पेलेटिंग के लिए किया जाता है, और फेरो-मिश्र धातुओं, सिलिकॉन-मैंगनीज, कैल्शियम-कार्बाइड और सिलिकॉन-कार्बाइड के उत्पादन में।

पिघलाने, कास्टिंग, सिंटरिंग, हीट ट्रीटमेन्ट, ब्रेजिंग आदि धातुकर्मों में सुविधा होती है।

"" एन्थ्रेसाइट के कुछ ग्रेडकोयला का उपयोग सिंटरिंग , पुलवराइज़्ड कोल इंजेक्शन , डायरेक्ट ब्लास्ट फर्नेस चार्ज, पेलेटिंग के लिए किया जाता है, और फेरो-मिश्र धातुओं, सिलिकॉन-मैंगनीज, कैल्शियम-कार्बाइड और सिलिकॉन-कार्बाइड के उत्पादन में।

""पिघलाने, कास्टिंग, सिंटरिंग, हीट ट्रीटमेन्ट, ब्रेजिंग आदि धातुकर्मों में सुविधा होती है।

सिंटरिंग इसके अंग्रेजी अर्थ का उदाहरण

The materials can be formed into almost any shape and size using a process called sintering, whereby powdered barium ferrite is pressed into a mold, and then heated until it fuses together.

Yunzi is a style of stone first produced in the Tang Dynasty in China by sintering a trade-secret mixture of mineral compounds including agate (resulting in the slightly yellow-green hue of traditional yunzi stones).

The reaction proceeds via liquid phase sintering.

These knife blades are usually produced through the dry-pressing and firing of powdered zirconia using solid-state sintering.

Cooling to the monoclinic phase after sintering causes a large volume change, which often causes stress fractures in pure zirconia.

Molybdenum disilicide and MoSi2-based materials are usually made by sintering.

Therefore, application of conventional hot press sintering techniques is problematic.

Bonding of silicon nitride powders can be achieved at lower temperatures through adding additional materials (sintering aids or "binders") which commonly induce a degree of liquid phase sintering.

A cleaner alternative is to use spark plasma sintering where heating is conducted very rapidly (seconds) by passing pulses of electric current through the compacted powder.

It can be prepared by sintering of a blend of strontium oxide or strontium carbonate with alumina in a roughly equimolar ratio at about 1500"nbsp;°C.

The ceramic materials (such as PZT ceramic) have a piezoelectric constant/sensitivity that is roughly two orders of magnitude higher than those of the natural single crystal materials and can be produced by inexpensive sintering processes.

Builders break up layers of naturally fallen snow into powder and thoroughly mix bottom and top layers of snow to increase sintering, thus strengthening the eventual structure.

Longer sintering time generally reduces risk of excavation collapse.