शीट-धातु हिंदी उपयोग और उदाहरण

"" ये आवेशित कण एक वैक्यूम चैम्बर के अंदर 'डीज़' नामक दो खोखले $डी$ आकार वाले शीट धातु इलेक्ट्रोड के बीच लागू होता है।

बजाय इसके वे गैस से हवा ताप विनिमायक हैं, जो आम तौर पर कटे स्टील शीट धातु के बने होते हैं।

ये आवेशित कण एक वैक्यूम चैम्बर के अंदर 'डीज़' नामक दो खोखले $डी$ आकार वाले शीट धातु इलेक्ट्रोड के बीच लागू होता है।

धातु से जुड़ा हुआ (एमई) - एक स्विचगियर असेंबली पूरी तरह से शीट धातु के साथ सभी तरफ और शीर्ष पर संलग्न है।

शीट-धातु इसके अंग्रेजी अर्थ का उदाहरण

He published an article on deep drawing of sheet metal which won the Whitworth Prize of the Institution of Mechanical Engineers in London in 1952.

Controls of this type are very widely used in industries with significant sheet metal fabrication, such as the automotive, appliance, and aerospace industries.

His first job was at the Commonwealth Aircraft Corporation factory in Port Melbourne, Victoria, as a sheet metal worker.

A piece of sheet metal was folded to make the fins and welded to the rear of the projectile.

One example might be attaching thin sheet metal to a wooden faceplate using wood screws, allowing the trepanning of holes, with the tool cutting into the sacrificial faceplate material.

Often in the Southern and rural United States garages not attached to the home and made from a timber frame with sheet metal coverings are known as "pole barns", but usually serve the same purpose as what is called a garage elsewhere.

After discovering galvanized sheet metal panels in the Bompaire warehouses - stockyards for billboard and hoarding panels - Raymond Hains decided to seize these latter and started photographying the environment and the building work concealed by the hoardings.

Strake: Crease in the sheet metal intended as a "speed line" styling feature.

Used to protect the thin sheet metal bodies from damage while off-roading.

It is a durable, low-maintenance weapon made of low-cost, easily obtained components, primarily stamped sheet metal and wood.

In commerce, the sizes of wire are estimated by devices, also called gauges, which consist of plates of circular or oblong form having notches of different widths around their edges to receive wire and sheet metals of different thicknesses.

The Warehouse District was described as "a realm of cinder block and sheet metal, a bleak landscape" that lay from San Pedro Street on the west to the Los Angeles River on the east and from First Street on the north to the Santa Monica Freeway on the south.