विरोध करनेवाला Meaning in English
विरोध करनेवाला शब्द का अंग्रेजी अर्थ : resistor
ऐसे ही कुछ और शब्द
विरोध करनेवाला मनुष्यप्रतिरोधक थर्मामीटर
विरोध करता है
फिर से बिठाना
फिर से कूतना
आकार परिवर्तन
आकार बदलना
आकार बदलें
पुनः आकार देना
पुनर्आकार
फिर से आकार
फिर से आकार दिया गया
रीसाइज़िंग
रेसमेस
रेसमेट
विरोध-करनेवाला इसके अंग्रेजी अर्थ का उदाहरण
An integrated circuit some times called chip or micro chip is a semi conductor which thousands of millions of tiny resistors, capacitors, and transistors are fabricated.
Integrated circuit design involves the creation of electronic components, such as transistors, resistors, capacitors and the interconnection of these components onto a piece of semiconductor, typically silicon.
For this reason, the next step in the IC design process, physical design stage, is to map the RTL into actual geometric representations of all electronics devices, such as capacitors, resistors, logic gates, and transistors that will go on the chip.
For example, some IC resistors can vary ±20% and β of an integrated BJT can vary from 20 to 100.
Using the ratios of resistors, which do match closely, rather than absolute resistor value.
Segmenting large devices, such as resistors, into parts and interweaving them to cancel variations.
The energy dissipated within a medium as sound travels through it is analogous to the energy dissipated in electrical resistors or that dissipated in mechanical dampers for mechanical motion transmission systems.
Early applications of triode tubes (Audions) as detectors usually did not include a resistor in the grid circuit.
A resistor (the grid leak) is connected either in parallel with the capacitor or from the grid to the cathode.
The resistor permits dc charge to "leak" from the capacitor and is utilized in setting up the grid bias.
The capacitor discharges through the resistor (thus grid leak) during the time that the carrier voltage is decreasing.
For power grid detection using a directly heated cathode tube, the grid leak resistor is connected between the grid and the negative end of the filament, either directly or through the RF transformer.
This definition may be more appropriate if considering the circulatory system in the brain as a Starling resistor, where an external pressure (in this case, the intracranial pressure) causes decreased blood flow through the vessels.