विद्युत्-परिपथ हिंदी उपयोग और उदाहरण

""आर्क चलाने के लिए आरंभ में दोनों इलेक्ट्रोड सटा दिए जाते हैं अत: विद्युत् परिपथ पूरा हो जाता है और धारा प्रवाहित होने लगती है।

इस उष्मा के कारण इलेक्ट्रोड के अग्र भाग वाष्पित हो जाते हैं और उन्हें थोड़ा विलग करने पर भी यह भाप विद्युत् परिपथ को पूरा किए रहती है।

विद्युत्-परिपथ इसके अंग्रेजी अर्थ का उदाहरण

* Emergency lighting or exit sign – connected to a battery backup or to an electric circuit that has emergency power if the mains power fails.

Kirchhoff's circuit laws – application of charge conservation to electric circuits.

At the end of the book, Doon manages to construct a simple electric circuit, based on a science book found amongst the books piled in a room in the village's storehouse.

Electrical impedance, the ratio of the voltage phasor to the electric current phasor, a measure of the opposition to time-varying electric current in an electric circuit.

The pieces had a metallic mesh at their base, which closed an electric circuit that encoded their position in the board.

This Branly showed by placing metal filings in a glass box or tube, and making them part of an ordinary electric circuit.

Console applications Electric power is the rate, per unit time, at which electrical energy is transferred by an electric circuit.

Electric power is transformed to other forms of energy when electric charges move through an electric potential difference (voltage), which occurs in electrical components in electric circuits.

From the standpoint of electric power, components in an electric circuit can be divided into two categories:.

At closely branched grids and where several electric circuits share a route (in particular when the lines operate at different voltages) on the same pylons the outside unbalance of the line, which is caused by the other electric circuits, dominates.

As the mutual influence of electric circuits can change after new lines are installed or old lines dismantled, certain transpositions may disappear or be added after new construction in electricity mains.

In the case of a twisted line the individual conductors of an electric circuit swap places, either in their whole course (at cables) or at certain points (at overhead lines).

Because of the smaller work capacity of the DHM stranding, it is possible to form additional electric circuits with the help of a phantom circuit.