वर्कपीस हिंदी उपयोग और उदाहरण

मिलिंग की क्रिया में घूमने वाले कर्तकों (कटर्स) का प्रयोग करके पदार्थ को वस्तु (वर्कपीस) से निकाला जाता है।

"" औजार प्रायः रैखिक गति करता है और घूमते हुए वर्कपीस प्र कुण्डलीनुमा रास्ता तय करता है।

वर्कपीस इसके अंग्रेजी अर्थ का उदाहरण

The workpiece is then clamped to the faceplate, typically using t-nuts in slots in the faceplate, or less commonly threaded holes in the faceplate itself.

In electric discharge machining, multiple tiny electric arcs are used to erode a conductive workpiece to a finished shape.

Water or solvents can be used, depending on the type of contamination and the workpiece.

Ultrasonic cleaning can be used for a wide range of workpiece shapes, sizes and materials, and may not require the part to be disassembled prior to cleaning.

Backboring (back"nbsp;boring, back-boring) is the process of reaching through an existing hole and then boring on the "back" side of the workpiece (relative to the machine headstock).

Boring operations on small workpieces can be carried out on a lathe while larger workpieces are machined on boring mills.

Lathe boring is a cutting operation that uses a single-point cutting tool or a boring head to produce conical or cylindrical surfaces by enlarging an existing opening in a workpiece.

Lathe boring usually requires that the workpiece be held in the chuck and rotated.

As the workpiece is rotated, a boring.

When the cutting tool engages the workpiece, a chip is formed.

Straight holes and counterbores are produced by moving the tool parallel to the axis of workpiece rotation.