लत्ता इसके अंग्रेजी अर्थ का उदाहरण

However, the side was again not strong enough for this level and was relegated on a slightly worse goal average then 16th-placed Union Solingen, lacking three goals to salvation.

Chromosome 16 spans about 90 million Claudio Fragasso (born 2 October 1951) is a film director and screenwriter.

Some colonial species will forage in groups, especially when resources are abundant.

For the 12-month period ending September 4, 2009, the airport had 40,949 aircraft operations, an average of 112 per day: 51% air taxi, 39% military, 6% scheduled commercial, and 4% general aviation.

However, after achieving this, Aquillius then encouraged Nicomedes to raid Pontic territory.

Alan and Michael Perry, who sculpted several of the special edition miniatures, agreed that the magazine was "a good thing for LotR", that encouraged people to take up the miniature wargaming hobby.

During this period, the challenge is not only to attend the festivities but to at least drink any type of alcoholic beverage every day.

North American fans formed an organisation, AFANA, specifically to work for improved media coverage of Australian Football.

The exceptional complete fusion, without sutures, of the astragalus and calcaneum, forming an element that is again fused to the widened lower end of the tibia, occasioned the generic name.

Order was restored, but the situation in the besieged city remained fragile.

Inspired, the workers return and continue to work toward their goal and pursue it with the level of diligence the Japanese managers had encouraged.

Aelita does not seem to exist in Garage Kids, and no character models of her were ever made.

Jerry Granelli, Enter a Dragon (Songlines, 1998).

लत्ता हिंदी उपयोग और उदाहरण

""कपड़ा-लत्ता, चूल्हा-चौका, दवा-दारू, गाजर-मूली, नदी-नाला, भोजन-वस्त्र, रोज़ी-रोटी, आदि।

कबहूँ लत्ता कलकत्ता की उड़ाओगे॥।

"" 1980 के दशक की एनिमेटेड सीरीज़ के लिए गॉर्डन-लेविट ने अपने मुखर प्रदर्शन को क्रिस लत्ता की आवाज की 'आधी याद ताजा' होने के रूप में वर्णित किया, लेकिन अपने स्वयं के विचारों को भी आधा किया, क्योंकि उन्हें लगा कि यह पूरी तरह से हास्यास्पद लगेगा।

जैसे - घूरे के लत्ता बीने-कनातन के डोल बांधे, समझदार की मौत है,आप, बात, मनोयोग, बृद्ध, भौं, मुच्छ, ह, ट, द आदि।

1980 के दशक की एनिमेटेड सीरीज़ के लिए गॉर्डन-लेविट ने अपने मुखर प्रदर्शन को क्रिस लत्ता की आवाज की 'आधी याद ताजा' होने के रूप में वर्णित किया, लेकिन अपने स्वयं के विचारों को भी आधा किया, क्योंकि उन्हें लगा कि यह पूरी तरह से हास्यास्पद लगेगा।

, यह, आदि एक सुगमा संगीता, या एक भक्ति संगीता शो, या एक यक्षगान प्रदर्शन, डोल्लू कुणिता, पूजा कुणिता, कोल्लत्ता, या एक सोमना कुणिता, हो सकता है।

"" जैसे - घूरे के लत्ता बीने-कनातन के डोल बांधे, समझदार की मौत है,आप, बात, मनोयोग, बृद्ध, भौं, मुच्छ, ह, ट, द आदि।

कपड़ा-लत्ता, चूल्हा-चौका, दवा-दारू, गाजर-मूली, नदी-नाला, भोजन-वस्त्र, रोज़ी-रोटी, आदि।

वह लत्ता के कपड़े पहने, हारून के महलों के ऊपर उजाड़ स्थान पसंद करता था, बासी रोटी के दंश पर रहता था।

अगले दिन, वहाब ने अपने अमीर जीवन को छोड़ दिया, लत्ता पहनकर सड़कों पर आ गया।

लत्ता इसके अंग्रेजी अर्थ का उदाहरण

Kaathidam Keralathe (2020).

Several soft stone bowls are lathe-turned.

Joyriders or other car thieves often gain access to a locked car with just a flathead screwdriver, although modern cars have systems to prevent a screwdriver from opening locks.

* Kansas – Kansas City, Overland Park, Olathe, Shawnee.

Single-point diamond turning is an alternate process, in which a computer-controlled lathe uses a diamond tip to directly cut the desired profile into a piece of glass or another optical material.

Nigerian emigrants to Canada A baluster is a vertical moulded shaft, square, or lathe-turned form found in stairways, parapets, and other architectural features.

** Flathead Lake Brewing Co.

The Airflow used a flathead I8 engine and was produced in both 2-door coupe and 4-door sedan variants.

Jane Barker was born in May 1652, in the village of Blatherwick, Northamptonshire, in England to Thomas Barker and Anne Connock.

2008 – Matt Helders – Matt A lathe faceplate is a basic workholding accessory for a wood or metal turning lathe.

It is a circular metal (usually cast iron) plate which fixes to the end of the lathe spindle.