रिसना इसके अंग्रेजी अर्थ का उदाहरण

Typically, the potter dips the vessel into the vat with the glaze for the white, and in extracting the vessel he or she can move the vessel around for the glaze to drip slowly in the direction desired.

A poor diet of bottle-fed sugar solution and diluted milk, allowed to drip down her throat, as she could not suck properly due to her cleft palate, weakened her condition, and vomiting and infection started.

By pulling the rope studded with obsidian shards through her tongue, she causes blood to drip onto paper strips held in a woven basket to be burned as depicted on Lintel 25.

The settlement was mentioned in the Domesday Book and the name of the hamlet derives from the Old English Lece or Lecan which means to drip or leak.

Since some of the peanut butter tended to drip off of him, making the floor sticky for other contestants, a rule was passed that forever after at science fiction convention masquerades, no peanut butter costumes would be allowed.

Some fluid is allowed to drip from the lens as it is inserted in order to ensure no bubbles become trapped under the lens after it is seated on the eye.

रिसना हिंदी उपयोग और उदाहरण

कई बार देखा गया है कि इससे खून रिसना शू हो जाता है, जो कई छोटे डॉट्स के रूप में दिखाई देता है जो पूरे क्षेत्र भर में घूमता है।

"" इसके द्वारा पानी का रिसना कम हा जाता है।

अनेक अर्थ हैं- रिसाव, रिसना, खाली होना, झुकाव, सम्बन्ध, अपनापन, त्याग आदि।

अन्‍य छह संघों में कईं कुएं हैं जो भूमिगत गैलरियों से संबद्ध है और जो इस प्रकार निर्मित है कि पास की पहाडि़यों से जल का रिसना घाटी के मध्‍य की ओर खींचा जा सके।

""अनेक अर्थ हैं- रिसाव, रिसना, खाली होना, झुकाव, सम्बन्ध, अपनापन, त्याग आदि।

एक समय ऐसा आयेगा जब पानी का रिसना कम हो जायेगा।

बुंदेलखंड सूखे के कारण जाना जाता है, लेकिन कितना भी सूखा पड़ जाए, इस पहाड़ से पानी रिसना बंद नहीं होता है।

रिसना इसके अंग्रेजी अर्थ का उदाहरण

In humans, this is sometimes known as pigment dispersion syndrome.

Multi-mode fiber has a fairly large core diameter that enables multiple light modes to be propagated and limits the maximum length of a transmission link because of modal dispersion.

Because multi-mode fiber has a larger core-size than single-mode fiber, it supports more than one propagation mode; hence it is limited by modal dispersion, while single mode is not.

This chromatic dispersion is another limit to the useful length for multi-mode fiber optic cable.

Because of the modal dispersion, multi-mode fiber has higher pulse spreading rates than single mode fiber, limiting multi-mode fiber's information transmission capacity.

The two types have different dispersion characteristics and thus different effective propagation distance.

This requires the SFP+ interface to support electronic dispersion compensation (EDC) however, so not all switches, routers and other equipment can use these SFP+ modules.

VCSEL power profiles, along with variations in fiber uniformity, can cause modal dispersion which is measured by differential modal delay (DMD).

Modal dispersion is caused by the different speeds of the individual modes in a light pulse.

The greater the length, the greater the modal dispersion.

To combat modal dispersion, LOMMF is manufactured in a way that eliminates variations in the fiber which could affect the speed that a light pulse can travel.

A grating possessing a chirp has the property of adding dispersion—namely, different wavelengths reflected from the grating will be subject to different delays.

This property has been used in the development of phased-array antenna systems and polarization mode dispersion compensation, as well.