बल्सा हिंदी उपयोग और उदाहरण

"" इस समय के दौरान कोको चैनल ने, बल्सान पुरुष समूह के एक सदस्य आर्थर 'बॉय' चैपल के साथ सम्बन्ध विकसित किये।

बल्सा, अल्मोडा तहसील।

बल्सा, अल्मोडा तहसील धनियाखान मल्ला, कोश्याँकुटोली तहसील में भारत के उत्तराखण्ड राज्य के अन्तर्गत कुमाऊँ मण्डल के नैनीताल जिले का एक गाँव है।

वित्तीय जोखिम बल्साना (Balsana) या बल्साणे (Balsane) भारत के महाराष्ट्र राज्य के धुले ज़िले में स्थित एक गाँव है।

भाटगडा, गंगोलीहाट तहसील बल्सा, अल्मोडा तहसील में भारत के उत्तराखण्ड राज्य के अन्तर्गत कुमाऊँ मण्डल के अल्मोड़ा जिले का एक गाँव है।

बल्सा इसके अंग्रेजी अर्थ का उदाहरण

The local pottery is hand-made and imported glazed 'perfume bottles' and balsamaria are wheel-turned.

The graves and grave goods relate poorly with those of the PIR, with the exception of the shared balsamaria vessels.

Blaby The Balsaminaceae (commonly known as the balsam family) are a family of dicotyledonous plants, comprising two genera: Impatiens, which consists of 1000+ species, and Hydrocera, consisting of 1 species.

La balsa de piedra – 2002.

His first board was a balsa board shaped by legend Mike Diffenderfer.

A mixed hardwood forest covers most of the park, chiefly paper birch and quaking aspen with occasional white spruce, eastern white pine, balsam fir, northern white cedar, poplar, and black ash.

The Embalmer (L'imbalsamatore) by Matteo Garrone (Italy).

Hydathodes are commonly seen in water lettuce, water hyacinth, rose, balsam, and many other species.

Hua, an expert in the field of information technology as well as an avid RC pilot, approached the design and manufacturing of his models from a market research viewpoint by determining the strengths and weaknesses in the ARF aircraft market, both foam and more traditional balsa/covering models.

After determining that there was too much competition in the balsa market, Hua turned his attention to injection molded foam even over laser-cut foam for more consistent quality and the ability to create more complex shapes than would be possible with either laser cut or balsa.

The hammer, a balsa-wood prop, had a pin at the end.

A more accurate method is to use a separate rudder vane; this is made from a plank of light wood such as balsa.

Traditionally Canada balsam was used as the cement in assembling these prisms, but this has largely been replaced by synthetic polymers.