फास्टनरों हिंदी उपयोग और उदाहरण

""फिक्स्ड तत्व (बोल्ट फास्टनरों)।

इस तकनीक में केवल पटाखों का उत्पादन ही नहीं होता उसके साथ-साथ माचिस, मोमबत्ती ऑक्सीजन, विस्फोटक बोल्ट और फास्टनरों, मोटर वाहन एयरबैग और गैस के दबाव खनन, उत्खनन और विध्वंस में नष्ट की घटकों का निर्माण भी करते है।

फास्टनरों इसके अंग्रेजी अर्थ का उदाहरण

Initial ground running of the engines revealed potentially disastrous vibration of the rear fuselage, which caused cracking of skin and structural components as well as loosening nuts and fasteners, also the fracture of pipeline and wiring loom support brackets.

On April 10, 2007, the Undersecretary of Defense for Acquisition, Technology and Logistics determined that most compliant fasteners could not be obtained in sufficient quantity without unreasonably delaying production, and exempted most fasteners from the requirement.

Additionally, the blanket exemption for fasteners was removed by Congress, now requiring that at least 50% of commercial fastener specialty metal content be domestic.

Domestic Non-Availability Determination for fasteners.

This resulted in new attention by all body manufacturers to the number and quality of fasteners.

To Wayne engineers, simply increasing the number of fasteners (rivets, screws, and huckbolts) was not satisfactory.

In their own tests, the joints were always the weak point under high stress loads regardless of the number of fasteners.

Instead of trying to figure out how to make the fasteners do a better job, the engineers stood back and wondered how the design features of the guard rails could be expanded.

The "Lifeguard" design reduced overall body weight, the number of fasteners used, and man-hours required for assembly.

After that date, most manufacturers (including Wayne) added special structural adhesives to other fasteners at body joints.

For example, a prototype might be assembled using nuts and bolts, but in production such fasteners might be replaced by captive nuts or threaded holes built into the parts, making assembly much faster, easier and therefore cheaper.

snap-together or machine welded parts instead of using fasteners.

Carrier, Intrenching Tool – The intrenching tool carrier is molded of EVA and the top flap is secured by means of two metal snap fasteners.