पोटेशियम-नाइट्रेट हिंदी उपयोग और उदाहरण

भटकटैया की रासायनिक संरचना का विश्लेषण करने पर ज्ञात होता है कि इसके पंचांग में सोले कार्पिडिन एल्केलाइड पोटेशियम नाइट्रेट और पोटेशियम क्लोराइड अल्प मात्रा में पाए जाते हैं।

जल्द ही यह सॉल्ट पीटर (पोटेशियम नाइट्रेट) के व्यापार का केन्द्र बन गया जिसके कारण फ्रेंच और डच लोग से प्रतिस्पर्धा तेज हुई।

अम्लों में स्टायरिक तथा पामिटिक अम्ल एवं लवणों में पोटेशियम नाइट्रेट, सोडियम सल्फेट एवं क्लोराइड प्रमुख हैं।

पोटेशियम नाइट्रेट -- KNO3।

"" जल्द ही यह सॉल्ट पीटर (पोटेशियम नाइट्रेट) के व्यापार का केन्द्र बन गया जिसके कारण फ्रेंच और डच लोग से प्रतिस्पर्धा तेज हुई।

पोटेशियम-नाइट्रेट इसके अंग्रेजी अर्थ का उदाहरण

The most common oxidizer is potassium nitrate (KNO3).

The oxidizer most often used in the preparation of sugar motors is potassium nitrate (KNO3).

Other oxidizers can be used as well, such as sodium and calcium nitrates as well as mixtures of sodium and potassium nitrate.

Two main issues need to be addressed with respect to the oxidizer if one is using potassium nitrate.

In dry compression, the sugar and potassium nitrate are individually ground as finely as possible, and then mixed in a ball mill or tumbler to ensure uniform mixing of the components.

First, the potassium nitrate is ground or milled to a fine powder, and then thoroughly mixed with powdered sugar which is then heated.

This method does not actually melt the potassium nitrate, as the melting temperature of KNO3 is , but it melts the sugar and coats the grains of KNO3 with the melted sugar.

A one-step hydrothermal process can be used to form crystals of barium ferrite, by mixing barium chloride, ferrous chloride, potassium nitrate, and sodium hydroxide with a hydroxide to chloride concentration ratio of 2:1.

Bluing may be applied by immersing steel parts in a solution of potassium nitrate, sodium hydroxide, and water heated to the boiling point, 275"nbsp;°F to 310"nbsp;°F (135"nbsp;°C to 154"nbsp;°C) depending on the recipe.

In this process, polished and cleaned steel parts are immersed in a bath of molten salts—typically potassium nitrate and sodium nitrate (sometimes with of manganese dioxide per pound of total nitrate).

During the first half of the 1930s the price of potassium nitrate fell 60%, and in 1934 Norsk Hydro announced they would move production; to compensate the state agreed to in part subsidize the transport on the railway.

Choe sought to smuggle some examples of secret items, and eventually was able to obtain knowledge of the three key ingredients of gunpowder: sulfur, slack or fine coal, and potassium nitrate.

However, the process to obtain niter, the mineral form of potassium nitrate, was difficult, and he did not know how to prepare gunpowder from the raw materials.