पहले-से-गरम-करना इसके अंग्रेजी अर्थ का उदाहरण

A preheated, one-tonne furnace melting iron can melt cold charge to tapping readiness within an hour.

Since the iCarly episode "iMake Sam Girlier", Schneider's Bakery's production logo has included the word "DanWarp" below the oven, giving the "Schneider's Bakery" text a shrunken down look, referencing Dan Schneider and the company's online identity, with a preheat light added on; it goes from red to black when the text appears.

In 2011, the logo was changed again to read "@DanWarp", as well as the oven timers moving when Sam " Cat premiered, the entire logo shrunken down to match the oven's size, as well as giving the "Schneider's Bakery" text a drop-shadow and the tiny white dot being added to the preheat light.

The weight of an explosive does not directly correlate with the energy or destructive impact of an explosion, as these can depend upon many other factors such as containment, proximity, purity, preheating, and external oxygenation (in the case of thermobaric weapons, gas leaks and BLEVEs).

Exhaust heat created during firing of the lower part of the kiln, preheats the chambers above.

In addition, the cooling ware and walls below preheat the incoming air.

Avoiding turnarounds requires the meltshop, including ladle furnaces (if any) to keep tight control on the temperature of the metal, which can vary dramatically with alloying additions, slag cover and deslagging, and the preheating of the ladle before it accepts metal, among other parameters.

These forces can be controlled by preheating the belts before mold entry, or by magnetically stabilizing them once they have entered the mold.

Belt preheating: For wide strip casting, a belt preheating system can be used to bring the belt up to 150"nbsp;°C or higher immediately prior to entering the casting mold, reducing the effects of cold framing.

Induction heating coils can be used across the width to preheat each belt.

In addition to preventing thermal distortion, the high preheat temperature serves to eliminate any moisture present on the belt surface.

The boilers were also converted to burn lighter oil for logistical reasons instead of the [fuel oil] that needs to be preheated.

Hot water used to heat Konakovo power plants and constitute part of the rechange system are preheated in a block heating installation, including main boilers, peaking hot-water heaters, the drain coolers of boiler and heating-system water pumps.