निविड़ता इसके अंग्रेजी अर्थ का उदाहरण

They are based roughly on the size of older Roman As and Sestertius in shape and thickness.

The Australian continental crust, excluding the thinned margins, has an average thickness of 38"nbsp;km, with a range in thickness from 24"nbsp;km to 59"nbsp;km.

These formulas also show that the more the temperature increases, the more increases the thickness of the premelt as this is energetically advantageous.

Segment types are further defined by the changes in the web thickness and type of diaphragms cast in cell.

The thickness of the deposit is around 120 m.

The lower deck over the machinery spaces and steering gear had a thickness of .

The beam splitter (with dimensions of 26"nbsp;cm diameter and 8"nbsp;cm thickness) is the only transmissive piece of optics in the high power path, therefore it was made from special grade fused silica.

Standard coating thickness range of stand-alone FBE coatings is between 250 and 500 micrometers, even though lower or higher thickness ranges might be specified, depending on service conditions.

0 μm and uses few layered phosphorene with a thickness varying from 2.

Appropriate length and thickness bungees are critical to ensure that the sidemount cylinders remain in trim horizontally along the diver's side torso with the valves under the armpits.

The mostly flat-lying basin has a maximum thickness of about 2,500"nbsp;m in Queensland, with up to 1,800"nbsp;m preserved in New South Wales.

Regulations were to be enforced regarding the thickness of walls, height of rooms, the materials used in repairs, the dividing of existing buildings and the placing and design of chimneys, fireplaces and drains.

5"nbsp;mm high with a stroke thickness of 0.

निविड़ता इसके अंग्रेजी अर्थ का उदाहरण

In humans, this is sometimes known as pigment dispersion syndrome.

Multi-mode fiber has a fairly large core diameter that enables multiple light modes to be propagated and limits the maximum length of a transmission link because of modal dispersion.

Because multi-mode fiber has a larger core-size than single-mode fiber, it supports more than one propagation mode; hence it is limited by modal dispersion, while single mode is not.

This chromatic dispersion is another limit to the useful length for multi-mode fiber optic cable.

Because of the modal dispersion, multi-mode fiber has higher pulse spreading rates than single mode fiber, limiting multi-mode fiber's information transmission capacity.

The two types have different dispersion characteristics and thus different effective propagation distance.

This requires the SFP+ interface to support electronic dispersion compensation (EDC) however, so not all switches, routers and other equipment can use these SFP+ modules.

VCSEL power profiles, along with variations in fiber uniformity, can cause modal dispersion which is measured by differential modal delay (DMD).

Modal dispersion is caused by the different speeds of the individual modes in a light pulse.

The greater the length, the greater the modal dispersion.

To combat modal dispersion, LOMMF is manufactured in a way that eliminates variations in the fiber which could affect the speed that a light pulse can travel.

A grating possessing a chirp has the property of adding dispersion—namely, different wavelengths reflected from the grating will be subject to different delays.

This property has been used in the development of phased-array antenna systems and polarization mode dispersion compensation, as well.