नायोबियम इसके अंग्रेजी अर्थ का उदाहरण

20th-century American inventors Nenadkevichite is a rare silicate mineral containing niobium with formula: (Na,Ca)(Nb,Ti)Si2O7·2H2O.

Strain in the niobium tin causes tetragonal distortions in the crystal lattice, which changes the electron-phonon interaction spektrum.

At some cooling regimes (depending on the rate of cooling), niobium carbide does not precipitate and the steel then behaves like unstabilized steel, forming chromium carbide instead.

These niobium oxides are exposed to air atmosphere resulting in pure Nb2O5.

The cooling rate after this treatment is not important, as the carbon that would otherwise pose risk of formation of chromium carbide is already sequestered as niobium carbide.

Strengthening fibers are often incorporated in the composite niobium tin wires to increase their stiffness.

In most circumstances, except for high field conditions, the niobium tin conduit will fracture before the critical strain is reached.

Structures made of such steels have to be heated in a whole to about 1065"nbsp;°C (1950"nbsp;°F), when the chromium carbide dissolves and niobium carbide forms.

At the Large Hadron Collider at CERN, extra-strong quadrupole magnets (for focussing beams) made with niobium–tin are being installed in key points of the accelerator between late 2018 and early 2020.

Since any strain in the niobium tin generally decreases the superconducting performance of the material, a proper combination of materials must be used to minimize this value.

German emigrants to England Niobium–titanium (Nb-Ti) is an alloy of niobium and titanium, used industrially as a type II superconductor wire for superconducting magnets, normally as Nb-Ti fibres in an aluminium or copper matrix.

8% in compression) for niobium tin, B is the applied magnetic field, and Bc2m is the maximum [Type-II superconductor|upper critical field] of the material.

MRI (Magnet Resonance Imaging) systems, most of which employ niobium-titanium, accounted for about 80% of that total.

नायोबियम हिंदी उपयोग और उदाहरण

प्रायः अतिचालक तार बनाने के लिए परम्परागत अतिचालक पदार्थों (जैसे, नायोबियम टाइटेनियम) का उपयोग किया जाता है लेकिन अब उच्च-ताप अतिचालकों (जैसे, YBCO) का भी प्रयोग होने लगा है।

नायोबियम - नायोबियम-टाइटेनियम मिश्रधातु के बने तार अतिचालक विद्युतचुम्बक बनाने में काम आते हैं।

इस समूह में वनेडियम (V), नायोबियम (Nb), टैंटेलम (Ta) और डब्नियम (Db) तत्व शामिल हैं।

""Image:A 1.3 GHz nine-cell superconducting radio frequency.JPG|नायोबियम से बनी अतिचालक कैविटी।

| 41 || नायोबियम || Nb || Niobium।

Image:Niobium crystals 1.jpg|नायोबियम क्रिस्टल।

Image:Nb,41.jpg|नायोबियम - Nb - ४१।

नायोबियम, पाइरोक्लोर (pyrochlore) एवं कोलम्बाइट (columbite) नामक खनिजों में पाया जाता है।

|| 41 || Nb || नायोबियम || 1s2 2s2 2p6 3s2 3p6 4s2 3d10 4p6 5s1 4d4 ( * )।

संक्रमण धातु नायोबियम (Niobium) एक रासायनिक तत्व है।

""संक्रमण धातु नायोबियम (Niobium) एक रासायनिक तत्व है।

उदाहरण के लिये, 1.8 केल्विन ताप पर नायोबियम से निर्मित 1.3 GHz के SRF अनुनादी का क्वालिटी फैक्टर Q5×1010 हो सकता है।

मिश्रधातुएँ - जैसे नायोबियम-टाइटेनियम (NbTi), लोल्ड-इण्डियन (AuIn) तथा यूरेनियम-रोडियम-जर्मेनियम (URhGe)।