नपा-तुला-होना इसके अंग्रेजी अर्थ का उदाहरण

If a CLRV or ALRV is damaged in a breakdown, collision or derailment, parts need to be replaced or be bent back into shape.

Taking on the work of Marx on the distinction between use-values and exchange-values, Wall stresses that "exchange values must be rejected", so that "economics can be bent towards serving the needs of humanity and nature rather than its own violent abstract growth".

Rigid copper, rigid due to the work hardening of the drawing process, cannot be bent and must use elbow fittings to go around corners or around obstacles.

Labour Cost: During installation MI cable must not be bent repeatedly as this will cause work hardening and cracks in the cladding and cores.

This is to say, the affected leg will be bent at the hip, while being shifted and pointed away from the body.

This is to say, the affected leg will be bent at the hip, while being shifted and pointed towards the middle of the body.

The plates may be bent to match the contour of the section.

Only after the weight has been shifted from one foot to the next should the back leg be bent slightly to allow it to glide forward (while the foot remains as close to the ground as possible) into the next "check" position.

The elbows should be bent very slightly.

The cable can be bent to follow shapes of buildings or bent around obstacles, allowing for a neat appearance when exposed.

The archaic slang "bender" for a sixpence emerged when the coin had a high silver content and could easily be bent, sometimes deliberately to create a love token.

If heated and allowed to slowly cool, called annealing, then rigid copper will become soft and can be bent/formed without cracking.

The gills are brittle except in a few cases, and cannot be bent parallel with the cap without breaking.