तरंगपथनिर्धारित्र इसके अंग्रेजी अर्थ का उदाहरण

The refractive index of the film is made greater than that of the glass slide, the film can serve as a dielectric planar waveguide for light via total internal reflection off the film–glass interface (and film–air interface).

However, as fibre manufacturing improved, the minute waveguide dimensional and structural changes that produce mode-mixing have been greatly reduced.

The waveguide places strict limits on the bandwidth of the signal and sets its propagation speed as a basic function of its construction, but the speed of the signal induced into the electron beam is relative to the speed of the electrons.

In July 2014, researchers at the University of Maryland reported using filamenting femtosecond laser pulses in a square arrangement to produce a density gradient in air which acted as an optical waveguide lasting on the order of several milliseconds.

Light is kept in the core by the phenomenon of total internal reflection which causes the fiber to act as a waveguide.

When the power in both the incident beam and the reciprocal waveguide mode is normalized, the fractional coupling amplitude is expressed as an integral over the product of the incident wave and the radiated reciprocal field.

Instead, it must be analyzed as an electromagnetic waveguide structure, by solution of Maxwell's equations as reduced to the electromagnetic wave equation.

The prism and tunneling layer are pressed against the waveguide film.

Digital waveguide synthesis, the synthesis of audio using a digital waveguide.

Its single crystals are an important material for optical waveguides, mobile phones, piezoelectric sensors, optical modulators and various other linear and non-linear optical applications.

The ranking of refractive indices of the four regions of the combined coupler and waveguide structure must be as follows: the refractive index of the glass slide and the tunneling layer must be lowest, next is the refractive index of the guide film, and highest is the index of the prism.

The power in the prism emerges as a collimated beam at an angle determined by the propagation constant of the waveguide mode and the refractive index of the prism.

This propagation, the slow-wave, reaches the next hole in the folded waveguide just as the same phase of the RF signal does.