ड्योडी इसके अंग्रेजी अर्थ का उदाहरण

It works by modulating a thyristor, SCR, triac, thyratron, or other such gated diode-like devices into and out of conduction at a predetermined phase of the applied waveform.

When screen-grid tubes became available for new designs in 1927, most manufacturers switched to plate detectors, and later to diode detectors.

Detection: The control grid and cathode operate as a diode.

The voltage of the recovered modulating signal is increased in the plate circuit, resulting in the grid leak detector producing greater audio frequency output than a diode detector, at small input signal levels.

The control grid and cathode are operated as a diode while at the same time the control grid voltage exerts its usual influence on the electron stream from cathode to plate.

At carrier signal levels large enough to make conduction from cathode to grid cease during the negative excursions of the carrier, the detection action is that of a linear diode detector.

The grid leak detector potentially offers greater economy than use of separate diode and amplifier tubes.

At small input signal levels, the circuit produces higher output amplitude than a simple diode detector.

Other disadvantages are that it can produce more distortion and is less suitable for input signal voltages over a volt or two than the plate detector or diode detector.

Small molded aspheres are often used for collimating diode lasers.

They are also commonly used for laser diode collimation, and for coupling light into and out of optical fibers.