टांकनेवाली इसके अंग्रेजी अर्थ का उदाहरण

They go through a two-month school learning welding, brazing, and soldering from Hull Maintenance Technician senior enlisted welders.

The processing of high temperature materials, both of metals and nonmetals, in a vacuum environment allows annealing, brazing, purification, sintering and other processes to take place in a controlled manner.

This used an aluminum fork crown that clamped the fork blades and the steerer instead of using welds or brazing.

Vacuum furnaces are used to carry out processes such as annealing, brazing, sintering and [treatment] with high consistency and low contamination.

Metal: usually steel or aluminum alloy tubing, assembled by brazing, welding, or nuts and bolts.

After brazing, each frame is hand filed and aligned on a digital alignment table.

Copper pipes are typically joined by soldering, brazing, compression fittings, flaring, or crimping.

Moser's frames are unique among Italian racing bicycles for being fillet brazed using silver solder rather than using lugs with brass brazing; silver solder never gets hot enough to weaken the tubing and thus bicycles constructed in this manner do not need to be reinforced with lugs, thus reducing the bicycle's weight.

He made several technical innovations, including brazing nickel-silver rods onto sheets of Monel to create rust resistant forms.

Bonding of the ceramic was performed using vacuum brazing and an alloy of titanium/nickel with a small percentage of copper.

Bontrager's belief in avoiding heat affection of the tubes led to versions of the Switchblade with bonded and riveted dropouts and brake bosses leading to a fork with no welding or brazing.

Joints could be strengthened by gussets to distribute loads and reduce the weakening of brazing and welding.

High-temperature processes include steelmaking, brazing, welding, casting metals, cutting, smelting and the preparation of some chemicals.