छँटना इसके अंग्रेजी अर्थ का उदाहरण

The Film Chamber 250 could be used alone or with the Motor Drive Unit or Motor Drive MF (the MF's grip had to be removed and coupled via a dedicated cord).

When the SR 86 expressway was fully constructed, SR 195 was to be removed from the state highway system according to state law; that expressway was finished in 2001.

The conversion required the main features of the Newport class, the bow doors, derrick, and tank ramp, to be removed.

" Samoa’s political opposition called for the health minister to be removed from his position.

Baháʼí institutions have signalled their intention to continue the requirement, although it is to be removed at some point in the future; they state that even though the Baháʼí Faith is no longer an obscure religion, the large majority of people do not know of its existence, and that most of its adherents are relatively new Baháʼís.

His work on the Last Judgment was interrupted at the end of 1565 by the death of Pope Pius IV, after which the scaffolding he used had to be removed quickly because the chapel was needed for the election of a new pope.

An enormous volume of rock alone had to be removed though some served as building material for the villas.

Needless to say, in the equation data points with zero measured photon counts need to be removed.

All changes made to the ship by the Spanish and previous owners were to be removed, such as all the cabins built for the trainees and the scrap iron ballast in the frames of the holds.

To offset the weight increase of these changes, a pair of secondary guns and the stern torpedo tube were to be removed.

Adding a center door to the car body, however, directly conflicted with the Manhattan style seating, so the center transverse seats had to be removed for these modifications.

At one place, of earth and needed to be removed to create a cutting.

छँटना इसके अंग्रेजी अर्थ का उदाहरण

In humans, this is sometimes known as pigment dispersion syndrome.

Multi-mode fiber has a fairly large core diameter that enables multiple light modes to be propagated and limits the maximum length of a transmission link because of modal dispersion.

Because multi-mode fiber has a larger core-size than single-mode fiber, it supports more than one propagation mode; hence it is limited by modal dispersion, while single mode is not.

This chromatic dispersion is another limit to the useful length for multi-mode fiber optic cable.

Because of the modal dispersion, multi-mode fiber has higher pulse spreading rates than single mode fiber, limiting multi-mode fiber's information transmission capacity.

The two types have different dispersion characteristics and thus different effective propagation distance.

This requires the SFP+ interface to support electronic dispersion compensation (EDC) however, so not all switches, routers and other equipment can use these SFP+ modules.

VCSEL power profiles, along with variations in fiber uniformity, can cause modal dispersion which is measured by differential modal delay (DMD).

Modal dispersion is caused by the different speeds of the individual modes in a light pulse.

The greater the length, the greater the modal dispersion.

To combat modal dispersion, LOMMF is manufactured in a way that eliminates variations in the fiber which could affect the speed that a light pulse can travel.

A grating possessing a chirp has the property of adding dispersion—namely, different wavelengths reflected from the grating will be subject to different delays.

This property has been used in the development of phased-array antenna systems and polarization mode dispersion compensation, as well.