घाव में टाँका लगाना Meaning in English
घाव में टाँका लगाना शब्द का अंग्रेजी अर्थ : soldering
ऐसे ही कुछ और शब्द
टांका लगाने की हथौड़ीसोदाहरण प्रतिपादन
सिपाही
सैनिक
भाग्य का सैनिक
देश रक्षक सेना का सिपाही
राज्य का सिपाही
हिम्सात्मक हमला करने वाला सैनिक
सैनिकों
सिपाही की सामग्री का झोला
सैनिक की दुल्हन
युद्ध में मारे गये सैनिक
भगवान के सैनिक
सैनिक की वर्दी
तलवा
घाव-में-टाँका-लगाना इसके अंग्रेजी अर्थ का उदाहरण
In aluminium soldering.
Triethanolamine, diethanolamine and aminoethylethanolamine are major components of common liquid organic fluxes for the soldering of aluminium alloys using tin-zinc and other tin or lead-based soft solders.
The term is also widely used for the different process of coating a metal with solder before soldering.
Unofficially Pentium III 1000/256, this was achieved by removing the chip off a MMC-2 socket card and soldering a Pentium III 1000 processor on the board.
Apart from conducting technical learning sessions for Component familiarisations and Electronic Design Automation (EDA) tools, ExESS also does hands on training sessions for soldering and PCB fabrication.
In jewelry making, pickling is used to remove the copper oxide layer that results from heating copper and sterling silver during soldering and annealing.
Other users recommend a "resoldering" of the nVidia GPU on the motherboard due to the overheating causing the solder on the built-in GPU to liquify.
Welding and soldering .
* Topics include electronics, robotics, microcontrollers, soldering, technician training, problem-solving, troubleshooting, CAD.
Head-in-pillow defects, or incomplete coalescence of ball grid array (BGA) sphere and solder paste deposit, is a failure mode that has seen increased frequency since the transition to lead-free soldering.
Flux is added to act as a temporary adhesive, holding the components until the soldering process melts the solder and fuses the parts together.
For example, when soldering plastic component packages to an FR-4 glass epoxy circuit board, the solder compositions used are eutectic Sn-Pb (63 percent tin, 37 percent lead) or SAC alloys (tin/silver/copper, named for the elemental symbols Sn/Ag/Cu).
These fluxes can be cleaned if required after the soldering process using a solvent (potentially including chlorofluorocarbons).