खुला-सर्किट हिंदी उपयोग और उदाहरण

"" इन मतभेदों के कारण, शब्दावली भ्रमित कर सकती है, कोइ एक पाठ्यपुस्तक निक्षिप्त करते हुए (parenthetically) यह उल्लेख कर सकता है कि 'आभासी खुला सर्किट' उतना ही उपयुक्त हो सकता है क्योंकि कोइ विद्युत् प्रवाहित नहीं होती है।

इन मतभेदों के कारण, शब्दावली भ्रमित कर सकती है, कोइ एक पाठ्यपुस्तक निक्षिप्त करते हुए (parenthetically) यह उल्लेख कर सकता है कि 'आभासी खुला सर्किट' उतना ही उपयुक्त हो सकता है क्योंकि कोइ विद्युत् प्रवाहित नहीं होती है।

'खुला सर्किट' (ओपन सर्किट), लघु परिपथ का वैद्युतिक विलोम है जिसमें विद्युत परिपथ के किन्ही दो बिन्दुओं के बीच प्रतिबाधा का मान अनन्त होता है।

""'खुला सर्किट' (ओपन सर्किट), लघु परिपथ का वैद्युतिक विलोम है जिसमें विद्युत परिपथ के किन्ही दो बिन्दुओं के बीच प्रतिबाधा का मान अनन्त होता है।

खुला-सर्किट इसके अंग्रेजी अर्थ का उदाहरण

Some couriers work for courier companies on an open circuit with a radio or bleeper, rather like minicabs.

Running expenses are much reduced, as is the unpredictable nature of the open circuit.

Most motorcycle couriers on the open circuit use machines no bigger than 600 cc, which are light and economical in town but adequate enough for occasional long distance work.

They use close circuit, semi close circuit and open circuit aqualung equipment, a scooter or sub-skimmer craft for underwater mobility, and an Avon Sea Raider Rigid Inflatable Boat or Hull (By deflating the hull, a Sea Raider can also can be used as a sub-skimmer craft).

In these situations it is more appropriate to use ideal switches that toggle instantaneously between a closed and an open circuit.

The tertiary cooling circuit is an open circuit diverting water from an outside reservoir such as a lake or river.

35 V (open circuit) voltage until about the last 5% of their lifetime, when their voltage drops rapidly.

Fill factor is defined as the ratio of the maximum power from the solar cell to the product of open circuit voltage Voc and short-circuit current Isc.

The term "constant voltage" in MPP tracking is used to describe different techniques by different authors, one in which the output voltage is regulated to a constant value under all conditions and one in which the output voltage is regulated based on a constant ratio to the measured open circuit voltage (V_{OC}).

In the constant voltage ratio (or "open voltage") method, the current from the photovoltaic array must be set to zero momentarily to measure the open circuit voltage and then afterwards set to a predetermined percentage of the measured voltage, usually around 76%.

As the name suggests, this requires access to known standards with a short circuit, open circuit, a precision load (usually 50 ohms) and a through connection.

The SOLT calibration method is less suitable for waveguide measurements, where it is difficult to obtain an open circuit or a load, or for measurements on non-coaxial test fixtures, where the same problems with finding suitable standards exist.

It is impossible to make a perfect open circuit, as there will always be some fringing capacitance.