क्लैडिंग हिंदी उपयोग और उदाहरण

कोर और क्लैडिंग (जिसमें नीचा अपवर्तक-सूचक है) जिसे आमतौर पर उच्च गुणवत्ता वाले सिलिका ग्लास से बना होता है, हालांकि इसे प्लास्टिक से भी बनाया जा सकता है।

प्राणी उद्यान की दीवारों पर भारतीय संस्कृति एवं दर्शन से अवगत कराने के लिए स्टोन क्लैडिंग कर म्यूरल्स बनाए जाएंगे।

""एक ऑप्टिकल फाइबर में एक कोर, एक क्लैडिंग और एक बफर (एक बाहरी सुरक्षात्मक कोटिंग) होते हैं, जिसमें क्लैडिंग आंतरिक प्रतिबिंब कुल विधि का उपयोग कोर द्वारा प्रकाश के साथ गाइड करता है।

क्लैडिंग इसके अंग्रेजी अर्थ का उदाहरण

Flames can occupy the cavity between the insulation material and the cladding, and be drawn upwards by convection, elongating to create secondary fires, and do so "regardless of the materials used to line the cavities".

Multi-mode fibers are described by their core and cladding diameters.

5 micrometres (μm) and a cladding diameter of 125"nbsp;μm.

The transition between the core and cladding can be sharp, which is called a step-index profile, or a gradual transition, which is called a graded-index profile.

This means that the reflection and transmission spectra are complementary and there is negligible loss of light by reflection into the cladding or by absorption.

The challenge is to operate these monolithic cavities at the kW CW power level in large mode area (LMA) fibers such as 20/400 (20"nbsp;μm diameter core and 400"nbsp;μm diameter inner cladding) without premature failures at the intra-cavity splice points and the gratings.

In a double-clad fiber there are two waveguides – the Yb-doped core that forms the signal waveguide and the inner cladding waveguide for the pump light.

The inner cladding of the active fiber is often shaped to scramble the cladding modes and increase pump overlap with the doped core.

An image of such a splice is shown, showing the shaped cladding of the doped double-clad fiber.

SCWRs need a higher standard of core materials (especially fuel cladding) than either of these.

loss of feedwater flow or large break loss-of-coolant accident) resulting in accident and transient temperatures that are too high for conventional metallic cladding.

It received a new cladding in the seventeenth century.