एप्लिकेटर Meaning in English
एप्लिकेटर शब्द का अंग्रेजी अर्थ : applicator
, appetor
ऐसे ही कुछ और शब्द
प्रार्थना पत्रएपिंग
वाहवाही करना
वाहवाही देना
तालियों की तूफ़नी गड़गड़ाहट
वाहवाही
तालियां
शाबाशी
सेब
सेबडिला
सेब की टोकरी
सेब का ठेला
सेब तुषार
सेब geranium
सेब का रस
एप्लिकेटर हिंदी उपयोग और उदाहरण
""एक दीर्घकालिक परियोजना जिसमें छिड़काव के एप्लिकेटर शामिल होते हैं।
एप्लिकेटर इसके अंग्रेजी अर्थ का उदाहरण
The fish offers the detail of its relief through the silk, and the ink is applied painstakingly to the silk while adhered to the fish, with tampos (applicators made of silk wrapped around cotton).
In 1969 the German company Henkel invented the glue stick after studying the "twist-up ease" and convenience of lipstick applicators.
Van Buren sounds have very pronounced tips and applicators.
Needle valves are also commonly used to provide shut off for the pressure gauge or on applicators to shut off the supply of NH3 to the knives in Anhydrous Ammonia (NH3) applications.
In September 1908, he joined the Naval War College, Newport, Rhode Island, for duty as a member of the staff of that college, remaining there until 1910, and it was during this tour of service that the "applicatory method" of instruction was put into effect.
Welsh pioneer settlers in Patagonia A rotary atomizer is a paint applicator used in high volume automatic production painting environments.
Also called a 'paint bell', "rotary bell atomizer" or 'bell applicator', it is preferred for high volume paint application for its superior transfer efficiency, spray pattern consistency, and low compressed air consumption, when compared to a paint spray gun.
Rotary atomizers can provide highest transfer efficiency of any paint applicator at approximately 95%.
They are automatic electrostatic applicators.
This means that the applicator puts an electric charge on each droplet of paint to attract it to the part being sprayed.
The bell cup inside the applicator, spins the material at 20,000 to 60,000 revolutions per minute.
The typical bell applicator consists of five major assemblies: the valve module, the bell cup, the turbine, the shaping air shroud, and the electrostatic system.
The electrostatic system can be internal or external (or direct or indirect charge), and supplies high voltage (30,000 to 100,000 volts DC) charge to the applicator, or the air surrounding it.