उद्वेष्टरोधक इसके अंग्रेजी अर्थ का उदाहरण

The kino, mayat, which oozes from the tree contains tannins which have antiseptic qualities.

Often warm saline is used but other solutions may contain [peroxide], chlorhexidine or other antiseptics.

It sounded sterile, antiseptic, lifeless "mdash; like a robot with a synthetic voice.

George Ben Johnston, prominent physician in Richmond who is credited with the first antiseptic operation performed in Virginia.

Australian television series based on American television series Cetrimide, or alkyltrimethylammonium bromide, is an antiseptic which is a mixture of three quaternary ammonium compounds: tetradonium bromide (TTAB or MITMAB), cetrimonium bromide (CTAB), and laurtrimonium bromide (DTAB or LTAB).

Joseph Lister (1827–1912): British surgeon and a pioneer of antiseptic surgery.

5 April – Joseph Lister, 1st Baron Lister, pioneer of antiseptic surgery (died 1912).

2% (providing antiseptic, locally anaesthetic and antipruritic effects) and chlorhexidine digluconate 0.

3% (antiseptic) in a petroleum jelly USP and lanolin base.

The bare, white concrete walls and bolted-down furniture gave the residence an antiseptic, institutionalized feel.

The use of mercuric cyanide as an antiseptic was discontinued due to its toxicity.

The leaves of Agathosma betulina have traditionally been used as an [remedy] for ailments of the gastrointestinal and urinary tracts, as it has diuretic and antiseptic properties due to various phenolic compounds.

It can be also used as an antiseptic agent.

उद्वेष्टरोधक हिंदी उपयोग और उदाहरण

""इनके औषधी के रूप में प्रयोग अवसादरोधी, रोगाणुरोधक, उद्वेष्टरोधक, कामोद्दीपक, शामक और गर्भाशय के रूप में किया जाता है।

इनके औषधी के रूप में प्रयोग अवसादरोधी, रोगाणुरोधक, उद्वेष्टरोधक, कामोद्दीपक, शामक और गर्भाशय के रूप में किया जाता है।

उद्वेष्टरोधक इसके अंग्रेजी अर्थ का उदाहरण

An integrated circuit some times called chip or micro chip is a semi conductor which thousands of millions of tiny resistors, capacitors, and transistors are fabricated.

Integrated circuit design involves the creation of electronic components, such as transistors, resistors, capacitors and the interconnection of these components onto a piece of semiconductor, typically silicon.

For this reason, the next step in the IC design process, physical design stage, is to map the RTL into actual geometric representations of all electronics devices, such as capacitors, resistors, logic gates, and transistors that will go on the chip.

For example, some IC resistors can vary ±20% and β of an integrated BJT can vary from 20 to 100.

Using the ratios of resistors, which do match closely, rather than absolute resistor value.

Segmenting large devices, such as resistors, into parts and interweaving them to cancel variations.

The energy dissipated within a medium as sound travels through it is analogous to the energy dissipated in electrical resistors or that dissipated in mechanical dampers for mechanical motion transmission systems.

Early applications of triode tubes (Audions) as detectors usually did not include a resistor in the grid circuit.

A resistor (the grid leak) is connected either in parallel with the capacitor or from the grid to the cathode.

The resistor permits dc charge to "leak" from the capacitor and is utilized in setting up the grid bias.

The capacitor discharges through the resistor (thus grid leak) during the time that the carrier voltage is decreasing.

For power grid detection using a directly heated cathode tube, the grid leak resistor is connected between the grid and the negative end of the filament, either directly or through the RF transformer.

This definition may be more appropriate if considering the circulatory system in the brain as a Starling resistor, where an external pressure (in this case, the intracranial pressure) causes decreased blood flow through the vessels.