आस्टसीलस्कप इसके अंग्रेजी अर्थ का उदाहरण

The difference in received signal timing can even be measured visibly using an oscilloscope.

Though more advanced protocols exist such as Digital MultipleX DMX (lighting), it was widely used in larger venues such as London's West End theatres which had Strand Lighting dimming installations, and it was popular amongst technicians because all the levels can be "seen" on an oscilloscope.

Working on building mixers based on other peoples' designs, he found that distortion "ndash; already visible in oscilloscope traces "ndash; and set out to eliminate it through better design.

It has been used in low frequency applications such as blinking warning lights, stroboscopes, tone generators in electronic organs and other electronic music circuits, and in time bases and deflection circuits of early cathode-ray tube oscilloscopes.

LeCroy Corporation, an American manufacturer of oscilloscopes, protocol analyzers and other test equipment.

Although Pierce didn't discover the mechanism by which it worked, he did prove that the existing theories were wrong; his oscilloscope waveforms showed there was no phase delay between the voltage and current in the detector, ruling out thermal mechanisms.

In signal integrity engineering it is usually called eye closure (a reference to the clutter in the center of a type of oscilloscope trace called an eye diagram).

They can be recorded by an oscilloscope and camera, but more modern techniques convert the signal with an analog-to-digital converter and output to a computer to be saved.

analog-to-digital converter can act as a hardware complement of a virtual oscilloscope, a potentiostat enables frequency response acquisition and analysis in electrochemical impedance spectroscopy with virtual instrumentation.

Traditional hardware instrumentation systems are made up of pre-defined hardware components, such as digital multimeters and oscilloscopes that are completely specific to their stimulus, analysis, or measurement function.

Some machines can be used with oscilloscopes and their peripherals as well.

Alignment required a special alignment pack, an oscilloscope, an alignment tool that moved the read/write heads, and patience.

Range information was taken from the elevation array, and worked, as it did for most radars of the era, by triggering the trace on an "A-line" oscilloscope and read against a scale at the bottom.